What Is Biological Activated Carbon (BAC)? A Water Treatment Term Explained
What Is Biological Activated Carbon?
The wastewater treatment method built on biological activated carbon (BAC) is called the biological activated carbon process. It uses activated carbon as a carrier: during wastewater treatment a biofilm develops on the carbon surface, creating a biological treatment process in which activated-carbon adsorption and microbial oxidation of organic matter work synergistically. This improves the removal rate of organic matter, increases stability against toxic shock and load fluctuations, improves sludge dewatering and digestion performance, and extends the service life of the activated carbon. It is a new biological treatment technology dominated by biological treatment while also possessing physicochemical characteristics. Common process configurations include the powdered-carbon activated sludge process, fixed-bed catalytic oxidation, fluidized-bed adsorption and expanded-bed adsorption-oxidation. Experimental results show that the method works well for different industrial wastewaters (chemical, printing and dyeing, synthetic fiber, etc.) as well as for domestic sewage.
Operating Modes: Batch and Continuous
BAC operation is divided into static and dynamic modes. Static (or sequential batch) operation means powdered activated carbon is dosed into the water with continuous stirring; organic matter is degraded by the carbon's adsorption capacity and the biofilm formed on its surface, and once the BAC reaches adsorption equilibrium the carbon is separated from the water by sedimentation or filtration. Dynamic (or continuous) operation means the adsorption runs in a continuous-flow mode, generally with granular carbon, in three arrangements: fixed bed, fluidized bed and moving bed. Fixed beds are the most widely applied, fluidized beds come second, and moving beds are still rarely used.
Why the Process Stands Out
Owing to its outstanding advantages, this new process has already been applied in practice abroad for purification of polluted source water, industrial wastewater treatment and water reclamation. Research and application in China are still relatively limited. Because BAC technology involves many influencing factors and complex reaction processes, several hypotheses about its mechanism still coexist without a unified conclusion, and engineering operating conditions are not yet fully mature. In practical use, however, its advantages are universally recognized.
Field tests on BAC-sand filter columns illustrate the performance:
Turbidity: most turbidity removal occurs in the upper part of the BAC column, where large quantities of attached and suspended microorganisms make bioflocculation and biodegradation the key removal mechanisms; the sand layer provides polishing through particle attachment. Average turbidity removal is about 82.4%, with an average effluent turbidity of 0.51 NTU.
Organics and ammonia nitrogen: average removal of CODCr and UV254 is 40.4% and 48.9% respectively; when influent ammonia nitrogen is below 2 mg/L, the average removal rate reaches 82.5%.
Disinfection by-products: with CHCl3 and CCl4 as the main DBPs, the BAC-sand filtration process removes part of them, showing that it is effective in reducing or suppressing DBP formation.
History of the Term "Biological Activated Carbon"
From the late 1920s and early 1930s, powdered activated carbon began to be used abroad to remove taste and odor from water, and in 1930 the first water plant with activated-carbon adsorption basins for deodorization was built in Philadelphia, USA. After the 1950s, Europe and the United States began using activated carbon on a large scale for municipal drinking water and industrial wastewater. With the development of granular activated carbon (GAC) treatment technology, it was found that the GAC surface favors microbial growth, and carbon carrying microorganisms lasts longer than sterile GAC. In 1978, American expert G. A. Miller and Switzerland's R. W. Rice first adopted the term "Biological Activated Carbon" (BAC). In fact, several European countries had already applied BAC technology for advanced water treatment since the 1960s with good results. China began BAC research in the 1970s, but in wastewater treatment BAC technology is only just emerging, although its advantages are widely acknowledged in practice.
In the early 1980s, the Beijing Municipal Engineering Design Institute ran activated-carbon adsorption trials at the Tiancunshan water plant in Beijing, confirming that activated carbon effectively removes organic matter and toxic substances from slightly polluted source water. In recent years, Tongji University and Harbin University of Civil Engineering and Architecture have carried out in-depth BAC research and obtained practical results.
Applications of BAC in Water Treatment
Advanced Treatment of Slightly Polluted Source Water
The widest overseas application of BAC is advanced treatment of water, where it effectively removes organic matter; more than 70 water plants in Europe now use BAC. In China, the Yangshupu and Nanshi water plants in Shanghai adopted BAC in October 2002, and every finished-water index reached an internationally advanced level.
Because limits on color, metal content (Fe, Al, Mn, etc.) and trihalomethanes (THM) in drinking water are increasingly strict, interest has grown in processes combining ozone with biological filtration. Ozone-BAC replaces prechlorination with preozonation: ozone converts originally poorly biodegradable organics into biodegradable ones while raising the dissolved oxygen level. Dissolved ozone is present at very low concentration and decomposes rapidly, and the activated carbon catalytically decomposes residual ozone, so microbial growth in the bed is not inhibited - completely unlike the prechlorination situation. Studies by many experts at home and abroad confirm that BAC combined with ozone treats polluted source water very effectively. Research by Lyu Bingnan et al. showed that BAC greatly reduces the variety of organics in the effluent. The Kanamachi water purification plant in Japan has used powdered activated carbon since 1984 to remove the musty odor compound 2-methylisoborneol (MIB) with good results. W. Nishijima et al. studied the adsorption and desorption behavior of biodegradable dissolved organic carbon (BDOC) on BAC after preozonation, and its displacement by non-biodegradable dissolved organic carbon (non-BDOC); the BDOC generated by preozonation adsorbs slightly less strongly than the non-BDOC remaining after biodegradation. Preozonation before BAC therefore extends carbon life and lowers the organic load on the BAC stage.
Industrial Wastewater Treatment
F. Nishimura et al. treated sludge-drying wastewater containing both nitrification-inhibiting organics and high ammonia nitrogen with a combined BAC-BZ (biological zeolite) process: the inhibitory organics fell sharply across the BAC reactor and the ammonia nitrogen fell greatly across the BZ reactor, both the result of combined medium adsorption and biodegradation.
Bioactivated carbon stirred-tank reactors developed by some foreign universities achieved excellent results on printing and dyeing wastewater. Parallel tests of BAC, biological sand beds, pure activated carbon adsorption and pure biodegradation showed that the dye removal rate of the BAC system exceeds the sum of the rates of pure biodegradation and pure carbon adsorption alone.
Dutch experts combined a activated-carbon biofilm process (BACF) with reverse osmosis to treat pesticide-contaminated water, achieving pesticide removal as high as 99.5%; the ozone-BACF step also markedly reduced RO membrane fouling, giving excellent and stable performance.
Domestic Sewage Treatment
BAC also performs well on domestic sewage, especially because it combines biodegradation and adsorption, making it highly effective at removing nonionic surfactants (NISS). Schroder et al. in Germany used new comprehensive parameter analysis and mass spectrometry to verify pollutant removal and proved that ozone-BAC treatment of municipal sewage removes alkylbenzene compounds and their degradation products - strongly endocrine-disrupting polar compounds - more effectively. In Finland, an ozone + two-stage activated carbon process achieved excellent assimilable organic carbon (AOC) removal (effluent AOC below 10 μg/L). A. S. Sirotkin et al. treated nonionic-surfactant wastewater with BAC: in the initial period physical adsorption dominated, then as adsorption approached saturation and microbial activity grew, biodegradation strengthened until the two acted synergistically - the synergy manifesting as microbial regeneration of the carbon's adsorption capacity by 20% to 24%.
Outlook
With industrial development, pollution of drinking water sources is worsening and the kinds and quantities of pollutants keep growing in ever more complex compositions. Conventional treatment can no longer meet the demand, so advanced treatment is necessary, and single-function materials and methods are no longer adequate. Activated carbon - abundant in supply, easily regenerated and reusable - has therefore attracted wide attention. Its developed microporous structure and distinctive surface chemistry give it not only powerful adsorption and redox functions and electrical properties, but also the ability to be combined with other materials as a catalyst and as a carrier for catalysts and biology. These structural characteristics have made activated carbon a mainstay of water treatment technology, and they are exactly what makes the BAC process one of the most promising high-efficiency, low-cost approaches for improving water quality and safeguarding drinking water safety.