Coal Chemical RO Concentrate: Solving the Hard Problems with an Innovative Process
With the coal chemical industry growing fast, wastewater treatment has become a major issue for the sector, and treating coal chemical RO concentrate is the hardest part of it. Coal chemical production generates large volumes of wastewater — coal gas scrubbing wastewater, circulating water system blowdown, demineralised water system blowdown and more — with complex compositions and many pollutants. To recycle water and meet discharge standards, the wastewater is usually pre-treated first: coagulation and sedimentation remove suspended solids and colloids, pH is neutralised, and sodium hypochlorite is dosed to suppress microbial growth, giving initial water quality improvement. Once this pre-treated water passes through reverse osmosis (RO) membranes, however, it produces a wastewater with high salt and high organic content: coal chemical RO concentrate.
Coal chemical RO concentrate has many characteristics that make it very hard to treat. It is highly saline, and the salt not only affects the taste and performance of the water but also corrodes downstream equipment. Its colour is strong, the water appearing dark mainly because of complex organic components — phenols, alcohols, benzenes, aromatic hydrocarbons and fatty acids — most of which are hard to biodegrade, so organic concentrations stay high. RO concentrate is also compositionally complex and may contain heavy metal ions and ammonia nitrogen, making treatment difficult and costly; it is an urgent problem for the industry.
The problems caused by coal chemical RO concentrate are significant. Its high COD shocks downstream wastewater treatment, seriously undermining the stability of downstream units and making compliance difficult. It also raises the difficulty and risk of wastewater treatment operation: to keep the system running, companies must invest more manpower and material resources, and treatment and labour costs rise accordingly.
Conventional treatment processes alleviate the problem to some extent but all have clear drawbacks. Reflux increases the membrane load, accelerates membrane wear and shortens membrane life. Coagulation and adsorption target colloids and suspended solids, and their performance depends heavily on water quality and pH, so their applicability is limited. Activated carbon adsorption lowers COD, but the carbon must be periodically regenerated or replaced, which is costly. Advanced oxidation markedly improves COD, colour and biodegradability, yet cannot fully solve the problem on its own.
Against this background, SINOKLE has introduced a new coal chemical RO concentrate treatment process built around CDOF — the advanced ozone oxidation flotation unit — as its core.

Process flow diagram of coal chemical RO concentrate treatment
The process first doses coagulant and flocculant into the concentrate. After coagulation and sedimentation, part of the suspended solids and colloids coagulate and settle, initially lowering the pollutant load. The wastewater then enters the CDOF integrated advanced ozone oxidation flotation unit. Inside, the ozone produced by the ozone generator plays the key role. Ozone is strongly oxidising: it oxidises large-molecule organics into smaller molecules, lowering COD, and also removes colour markedly. Flotation then separates the oxidised impurities and fine particles from the water and carries them out with the backwash water.

Coal chemical RO concentrate at a project site After treatment in this unit, COD falls from ≤500 mg/L to below 60 mg/L and colour from ≤200 to below 30, a marked result. On operating cost, a complete 50 m³/h unit costs ≤10 RMB per tonne of water, which lowers the operator's costs while reducing environmental pollution; the process delivers good environmental and economic benefits and opens a new path for RO concentrate treatment in the coal chemical industry.