Coal Gasification Scrubbing Wastewater Solution
In modern industrial production, the scrubbing wastewater generated by coal gasification is a major challenge for environmental treatment because of its high oil content, high suspended solids and complex chemical composition. As a specialised solution provider for oily wastewater treatment, SINOKLE draws on its deep experience and technical innovation in the field to deliver an efficient and reliable solution for coal gasification scrubbing wastewater.

Process flow diagram of coal gasification scrubbing wastewater treatment
Coal gasification scrubbing wastewater first enters a collection tank, where coarse impurities and scum settle or float naturally; this preliminary physical separation reduces the load on downstream treatment.
After demulsifier dosing, the wastewater then enters the CDFU cyclonic dissolved gas flotation unit. CDFU uses large quantities of micro/nano bubbles and swirling action to separate oil and fine suspended solids from the wastewater efficiently. During flotation the micro/nano bubbles collide with and attach to oil droplets and suspended particles, forming agglomerates with a density lower than water and thereby achieving oil–water separation. The separated oily sludge is discharged to the oily sludge tank, and the treated effluent moves on to the next stage.
CDOF — the integrated advanced ozone oxidation flotation unit — is a patented device that applies advanced ozone oxidation for in-depth wastewater treatment. As a strong oxidant, ozone rapidly decomposes organic matter in the wastewater and lowers both chemical oxygen demand (COD) and biochemical oxygen demand (BOD). Ozone also destroys the colloidal structure of the wastewater and reduces its viscosity, making it easier to treat. In the CDOF unit, ozone is thoroughly mixed with the wastewater and reacts with it, further removing pollutants and breaking the gel structure to reduce viscosity.
After treatment in the CDOF unit, the wastewater quality improves markedly and, after the subsequent supporting processes, finally meets discharge or reuse standards.
This coal gasification scrubbing wastewater solution offers clear advantages:
The process flow is short and the equipment is skid-mounted, easy to transport and install, and can be truck-mounted and operated on site, giving strong adaptability.
CDOF and CDFU, as the company's patented equipment, deliver efficient, rapid treatment, significantly removing oil and suspended solids and improving effluent quality.
The solution has a small footprint and a short retention time (only one fifth of conventional systems), greatly reducing treatment costs.
The equipment runs fully enclosed and fully automatically, is safe and environmentally friendly, and is easy to operate, reducing manual intervention and environmental impact.
In practice the solution has already delivered remarkable results. In one coal gasification scrubbing wastewater project, for example, the influent contained ≤2,000 mg/L of oil and ≤300 mg/L of suspended solids, and after treatment the effluent contained ≤500 mg/L of oil and ≤20 mg/L of suspended solids, meeting the influent requirements of the downstream supporting process and achieving effective treatment and resource recovery. With its efficiency, reliability and environmental performance, the solution provides strong technical support for the coal gasification industry.