SINOKLE Innovation: Carbon-Based Catalysts — A New Chapter in Ozone Catalytic Oxidation
In environmental remediation and industrial purification, ozone catalytic oxidation is becoming one of the key technologies for solving complex pollution problems thanks to its efficiency and environmental performance. SINOKLE, a leading player in the industry, has drawn on its deep insight into materials science and its innovative spirit to develop a new carbon-based catalyst. The catalyst uses activated carbon as its carrier and offers high stability, easy separation and recovery, wide tolerance of reaction conditions and reduced by-product formation. SINOKLE's R&D team has long been committed to raising catalytic efficiency, cutting energy consumption and reducing environmental impact, and to providing a scientific basis for practical applications. The advantages of heterogeneous ozone catalysts over other catalysts are mainly as follows:
1. Efficiency: heterogeneous catalysts generally achieve higher catalytic efficiency because they can operate at lower ozone concentrations while maintaining a high conversion of pollutants. Since the active sites on the catalyst surface can be reused, a continuous catalytic process is possible, which improves overall efficiency.
2. Selectivity: heterogeneous ozone catalysts can be designed with high selectivity for specific reactions, meaning they preferentially promote the target reaction and reduce by-product formation. This selectivity is essential for raising product purity and reducing downstream separation steps.
3. Stability: heterogeneous catalysts are generally more stable than homogeneous ones because they are less affected by changes in reaction conditions such as pH, temperature and pressure. They can also be separated from the reaction mixture by simple filtration or centrifugation and reused many times, which lowers long-term operating costs.
4. Environmental impact: heterogeneous ozone catalysts are generally environmentally friendly because they reduce the formation of harmful by-products and cause no secondary pollution during use. They also improve ozone utilisation and reduce ozone waste.
The carrier of a heterogeneous ozone catalyst affects its activity, stability and selectivity. The physical and chemical properties of different carriers — specific surface area, pore structure and surface functional groups — have a marked influence on catalyst performance. Carrier selection should consider stability, chemical inertness, specific surface area, pore structure, mechanical strength and regeneration capacity; common carriers include activated carbon, molecular sieves and alumina. A suitable carrier improves catalytic efficiency, extends service life and reduces cost.
1. Metal oxide carriers:
Physicochemical properties: common metal oxide carriers include titanium dioxide (TiO2), alumina (Al2O3) and silica (SiO2). These carriers have good thermal and chemical stability and can provide a large specific surface area and a suitable pore structure, which favours catalyst dispersion and reactant adsorption.
Fig. Activated alumina catalyst
Preparation: usually by sol–gel, impregnation or precipitation methods. TiO2 carriers, for example, can be prepared by hydrolysis and condensation of titanium alkoxides.
Performance: in ozone catalytic reactions, metal oxide carriers provide active sites that promote ozone decomposition and the oxidation of target pollutants.
Advantages and limitations in industrial application:
Advantages: metal-oxide-supported catalysts have good durability and catalytic activity and suit high-temperature, highly corrosive environments, with good activity and stability.
Limitations: high-temperature activation may be required, and catalytic efficiency for some organic pollutants is limited.
Example: TiO2 is used in water treatment to degrade organic pollutants, for instance to decolourise dye wastewater.
2. Molecular sieve carriers:
Physicochemical properties: molecular sieves have a uniform pore size distribution and a large specific surface area, providing good molecular sieving and adsorption performance. Zeolites and MCM-41, for example, have regular channel structures and tunable pore sizes that deliver specific molecular sieving effects.
Fig. Zeolite-supported catalyst
Preparation: by hydrothermal synthesis, templating and similar methods. MCM-41 molecular sieve, for example, is prepared by hydrothermal reaction of a silica source and a template.
Performance: in ozone catalytic reactions, molecular-sieve-supported catalysts effectively adsorb and catalytically decompose organic pollutants, and are particularly suited to treating large-molecule organics.
Advantages and limitations in industrial application:
Advantages: good thermal and chemical stability, suitable for fine chemicals and petrochemicals.
Limitations: relatively high synthesis cost, strict requirements on raw materials and synthesis conditions, and pore structures that may be affected by contaminants.
Example: in the petrochemical industry, molecular-sieve-supported catalysts are used in catalytic cracking to improve product quality, and zeolites are widely used in the catalytic ozonation of volatile organic compounds (VOCs).
3. Activated carbon carriers:
Physicochemical properties: this group includes activated carbon, carbon nanotubes (CNTs) and graphene, which have a high specific surface area, a porous structure, good adsorption performance and chemical stability. This provides more active sites and enhances catalyst activity and stability.
Fig. SINOKLE carbon-based catalyst
Preparation: activated carbon is usually prepared by physical or chemical activation. Physical activation treats carbonised raw materials (coal, wood and the like) with steam or carbon dioxide at high temperature; chemical activation uses acids, alkalis or salts as activating agents.
Performance: in ozone catalytic reactions, carbon-based carriers provide abundant surface functional groups and electron transfer pathways, enhancing the adsorption capacity and catalytic activity of the catalyst and effectively decomposing organic pollutants.
Advantages and limitations in industrial application:
Advantages: excellent adsorption performance and catalytic activity, high catalytic efficiency, and suitability for oxidising a wide range of organic pollutants.
Limitations: activated carbon carriers have low mechanical strength and wear easily, and regeneration and recovery are relatively difficult.
Example: carbon nanotubes perform outstandingly in the catalytic ozonation of persistent organic pollutants (POPs); SINOKLE uses activated carbon as an ozone catalyst carrier to improve ozone decomposition efficiency effectively, and the catalyst is widely used in industrial wastewater treatment.
4. Composite carriers:
Physicochemical properties: composite carriers combine two or more materials, such as a metal oxide with a carbon material or a metal oxide with a molecular sieve. Composites can combine the advantages of different materials and improve catalytic performance.
Fig. Composite carrier catalyst
Preparation: composite carriers are prepared by physical mixing, chemical deposition, sol–gel and similar methods.
Performance: composite carriers provide synergistic effects that enhance catalyst activity, stability and selectivity.
Advantages and limitations in industrial application:
Advantages: catalytic performance can be designed to suit the application, improving catalytic efficiency.
Limitations: preparation may be complex and costly.
Example: TiO2/activated carbon composites perform well in the catalytic ozonation of recalcitrant organic pollutants.
With its unique porous structure and high specific surface area, activated carbon provides an ideal platform for catalytic reactions. SINOKLE loads the active components uniformly onto the activated carbon carrier by combining chemical vapour deposition (CVD) with impregnation. Characterisation by scanning electron microscopy (SEM), X-ray diffraction (XRD) and specific surface area and pore size analysis (BET) confirmed that the catalyst has good structural characteristics and a high loading of active components. In ozone catalytic oxidation the catalyst effectively lowers the reaction activation energy and accelerates the decomposition of harmful substances, delivering outstanding performance in water treatment, air purification and industrial off-gas treatment.
Fig. SEM image of the SINOKLE heterogeneous carbon-based catalyst (10,000X)
Advantages of SINOKLE carbon-based catalysts: High efficiency — the synergy between the active components and the activated carbon carrier markedly improves catalytic efficiency, shortens treatment time and raises pollutant removal; Environmental performance — no additional chemicals are needed during catalysis, which avoids secondary pollution and complies with green chemistry principles; Stability — the catalyst retains high activity after repeated cycles, showing good stability and lowering maintenance costs; Applicability — several transition metals work in synergy to give good removal of a wide range of organic pollutants.