Coal Tar Hydrogenation Sour Water Treatment Solution
Definition of coal tar hydrogenation sour water Sour water from coal tar hydrogenation is a by-product generated when coal tar is hydrotreated. Coal tar hydrogenation converts the complex organic compounds in coal tar into more valuable oil products through hydrogenation reactions, and an aqueous phase containing acidic substances is produced along the way.
Characteristics of coal tar hydrogenation sour water
1. Strong acidity
- Coal tar hydrogenation sour water contains a variety of acidic substances such as hydrogen sulphide (H₂S), carbon dioxide (CO₂) and phenolic compounds. These give the water a low pH and strong corrosivity.
- Hydrogen sulphide, for example, ionises in water to release hydrogen ions and makes the water acidic: H₂S ⇌ H⁺ + HS⁻.
2. Organic pollutants
- The sour water contains large amounts of organic pollutants such as phenols and polycyclic aromatic hydrocarbons, which are toxic and poorly biodegradable.
- Phenolic compounds are typical organic pollutants: the hydroxyl group (-OH) in their structure gives them a certain acidity and makes them toxic to living organisms.
3. High oil content
- Coal tar hydrogenation sour water usually contains a certain amount of oily substances, which form emulsions and make treatment more difficult.
- The presence of oil affects downstream water treatment. In flotation and filtration, for example, oil can clog equipment or reduce treatment performance.
4. Large water quality fluctuations
- Because the operating conditions of the hydrogenation process and the properties of the feedstock vary, the quality of the sour water fluctuates considerably.
- For example, when the source of the coal tar or the temperature and pressure of the hydrogenation reaction change, the types and concentrations of pollutants in the sour water change as well, which challenges stable operation of the treatment process.
New process for coal tar hydrogenation sour water treatment Because this sour water is strongly acidic, carries organic pollutants and oil, and fluctuates in quality, a dedicated treatment process is required. To solve the problem of this sour wastewater stream, SINOKLE has developed a new treatment process built around its own patented product portfolio, with CDFU and KHC as the core.
The treatment flow is as follows:

Sour water passes successively through coarse filter A/B, CDFU (cyclonic dissolved gas flotation), fine filter A/B and the KHC coalescing oil separator before entering the stripper unit, ensuring that the wastewater is treated effectively. The process achieves purely physical demulsification and separation of the sour water with no chemical dosing, no scum or oily sludge and no secondary pollution, and demulsification is both effective and stable. In addition, it recovers separated oily sludge of good quality and low water content that can be reprocessed, giving the process energy-saving, environmental and economic benefits.

Case: a sour wastewater treatment project
CDFU and the KHC coalescing oil separator are both products developed independently by SINOKLE, and they offer clear advantages over the machinery used in conventional processes.CDFU is a new-generation, green and highly efficient vertical-tank flotation unit based on cyclonic dissolved gas flotation technology. It combines cyclonic centrifugal separation, ultrafine bubble generation and dissolved gas flotation, and this combination lets it separate oily sludge, emulsified oil and suspended solids from wastewater quickly and efficiently.
The KHC coalescing oil separator uses a super-oleophilic, hydrophobic coalescing fibre material and an optimised internal structure. It integrates cyclonic centrifugal separation, wetting coalescence, collision coalescence and interception filtration to coalesce, separate and remove emulsified oil from wastewater efficiently.