Refinery Tank Farm Cut Water Pretreatment Process

2026-11-20 10:43:39
立即下载


Cut water in a refinery tank farm refers to a key step in petroleum refining: separating the water that has settled in storage tanks from the crude oil. The purpose is to remove that settled water from the crude effectively, so as to maintain crude quality and ensure safe tank farm operation. Cut water treatment is not only an important step in keeping a refinery running normally, but also an important route to reducing environmental pollution and achieving resource reuse.


The main pollutants in refinery tank farm cut water include oil, suspended solids and chemical oxygen demand (COD). They come mainly from pump cooling water in the process units, oil vapour condensate, and water used to wash oil products and oil vapour. Such oily wastewater carries a high oil content: electric desalter effluent, oil–water separator effluent and tank cut water (especially crude tank cut water) typically contain 500–1,000 mg/L of oil, and COD is also high, at around 1,000 mg/L.


The difficulties of cut water treatment in refinery tank farms are mainly as follows:

Difficult to separate completely: crude oil and water are tightly mixed in the tank, and improper treatment leaves residual water and impurities that affect product quality.

High treatment cost: conventional technologies such as gravity settling, hydrocyclone and membrane separation consume large amounts of energy and chemicals.

Safety hazards: untimely or incomplete treatment destabilises the pressure and temperature inside the tank and may cause accidents.

Environmental pollution: unless properly treated, the wastewater generated during the process causes serious harm to the environment.


To solve these problems, SINOKLE has developed a highly efficient and environmentally friendly new process. Built around a "high-efficiency coalescing oil separator + CDFU cyclonic dissolved gas flotation" combination, together with other filtration equipment, the process achieves purely physical, chemical-free oil–water separation.

sinokle

Process flow diagram of refinery tank farm cut water pretreatment

Tank farm cut water first enters an oily water buffer tank and is then pumped to the high-efficiency coalescing oil separator, where most of the oil and suspended solids are removed. It then flows into the CDFU cyclonic dissolved gas flotation unit for advanced treatment, where oil and suspended solids are further removed and the oil content of the effluent drops below 100 mg/L. The water then passes to the downstream units and, after advanced treatment, is finally discharged up to standard.

sinokle

Cut water treatment unit at a refinery tank farm in Sichuan


Process advantages:

High treatment efficiency: advanced technology and equipment remove all kinds of impurities and pollutants quickly and efficiently, with a removal efficiency of over 95%.

Small footprint: the skid-mounted, compact design greatly reduces the footprint of the whole treatment system and saves land resources.

No chemicals: purely physical demulsification and de-oiling require no chemical dosing, which reduces sludge generation and disposal costs and avoids secondary pollution.

Stable operation: the system has high shock resistance and adapts to large fluctuations in water quality, ensuring stable effluent quality.

Significant economic benefits: the recovered oil can be returned directly to the crude tank for reuse, creating economic value.

High automation: skid-mounted equipment, automated and easy to operate and maintain, with a short construction period and online installation, which lowers labour and management costs.




Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service