Ethanol Production Wastewater: Characteristics and a New CDOF-Based Treatment Process
Ethanol Industry and Its Wastewater
The ethanol industry is an important basic raw-material industry of the national economy. Ethanol is widely used in chemicals, food, daily chemicals, medicine and health care, and also serves as a wine base, extraction agent, solvent, detergent and surfactant. The most serious pollution of the ethanol industry is water pollution: ethanol production generates large volumes of wastewater, mainly from the stillage discharged after distillation of the fermented mash, equipment washing and rinsing water, and cooling water from cooking, saccharification, fermentation and distillation processes.

A large ethanol production base
Characteristics of Ethanol Wastewater
Ethanol wastewater is organic wastewater with high concentration, high temperature and high suspended solids, typically featuring:
High suspended solids: average SS content up to 40,000 mg/L;
High temperature: average water temperature about 70 °C, and up to 100 °C for stillage discharged from the distillation bottoms;
High concentration: COD up to 20,000-30,000 mg/L, including suspended, dissolved and colloidal COD; organics account for 93-94% and inorganics 6-7%. The organics are mainly carbohydrates, followed by nitrogen compounds, biomass and undegraded products such as butanol and ethanol;
Acidity: about 500 mg/L of organic acids makes the wastewater acidic. In the initial stage of operation, alkali dosing or sludge return can be considered to balance pH; after the system stabilizes and acquires sufficient buffering capacity, neither is needed;
Inorganics: mainly dust and impurities from the raw materials.
Why Pretreatment Is Needed
The biological effluent of ethanol production wastewater has poor biodegradability; discharging it directly to a downstream wastewater plant would seriously disturb the biological system and cause effluent fluctuation. This stream therefore needs pretreatment to improve biodegradability before it enters the wastewater plant for harmless treatment.
Conventional Treatment Processes and Their Limits
Common ethanol wastewater treatment processes include anaerobic sludge tank processes, UASB + anoxic tank + contact oxidation, A/O processes, and UASB + oxidation pond combinations. These conventional processes can handle the wastewater of ordinary ethanol plants, but they have drawbacks: large footprint, unstable treatment performance, poor shock-load resistance, long commissioning periods, combustible-gas leakage risks, and complex operation and maintenance that relies heavily on experienced technicians.

CDOF industrial unit on site
The New CDOF-Based Process
To solve these ethanol wastewater problems, SINOKLE - drawing on production practice and scientific experiments combined with its self-developed patented core technology CDOF (an integrated catalytic-oxidation flotation unit with ozone) - has launched a treatment process adapted to ethanol production wastewater.

Process flow diagram of ethanol wastewater treatment
The ethanol wastewater enters the pipeline via a lifting pump, and a high-efficiency dosing device injects ozone gas into the CDOF unit. Under the high-speed shearing of the dosing pump, the ozone gas is quickly cut and compressed into tiny bubbles, so the ozone dissolves in the wastewater efficiently and rapidly. The ozone-saturated wastewater mixes with a water-quality modifier and enters the CDOF catalytic reaction unit, where the dissolved ozone molecules are converted, under the multiple catalysis of a liquid catalyst and a heterogeneous solid catalyst, into hydroxyl radicals (·OH, oxidation potential 2.8 V), which rapidly oxidize and decompose the organics step by step into H2O and CO2.
During the pressure reduction of the CDOF reactor effluent, hydrodynamic cavitation produces an additional catalytic effect. After two stages of catalytic reaction, the wastewater COD gradually falls to the required limit, and the effluent moves on to the downstream treatment steps.

Treatment results of a cassava ethanol wastewater project
Advantages of the New Process
An efficient, stable and mature full-quantity treatment process ensures stable, compliant effluent without secondary pollution or secondary treatment costs;
The equipment is compact with a small footprint to meet site constraints, and the skid-mounted, modular design allows rapid installation and commissioning;
Automatic control and convenient operation: automated design minimizes manual steps and reduces operator workload;
The main unit and auxiliary equipment run fully enclosed, with no leakage of foul-smelling gas, meeting on-site safety and environmental requirements.
By adopting new technologies, new processes, new materials and new equipment, this ethanol wastewater treatment process improves treatment efficiency, optimizes operation management, saves energy, and greatly reduces capital and operating costs, showing good application prospects.