Process Solution for Oily Wastewater from Light Oil Tank Farms: Water Draw-off, Tank Cleaning and Pipeline Leaks
1. Sources of oily wastewater at light oil tank farms
Oily wastewater at light oil tank farms comes mainly from the following:
Tank water draw-off
During storage, water settles to the tank bottom because of the density difference. Manual draw-off often carries more than 500 mg/L of oil, while automatic dehydrators can bring it below 300 mg/L. Manual draw-off at one gasoline tank reached 14,828 mg/L, underlining the need for control.
Tank cleaning water
Cleaning operations, especially water washing, produce high-strength oily wastewater with an instantaneous discharge of more than 3000 mg/L, containing emulsified oil and suspended solids in a complex composition.
Pipeline leaks
Ageing, corrosion or defective joints let product leak into soil or groundwater, creating a long-term pollution source.
Other sources
Including washdown water in loading areas, pump seal leaks and initial rainwater in tank areas (containing condensed oil droplets from tank-top vapour), whose pollution is diffuse and sudden.
2. Characteristics of the wastewater and treatment difficulties
Wastewater characteristic
| Indicator | Typical value | Treatment challenge |
|---|---|---|
| Oil content | 500-150,000mg/L | High proportion of emulsified oil; conventional gravity separation is inefficient |
| Suspended solids | 100-600mg/L | Clog conventional cartridges, raising maintenance costs |
| Oil form | Free, emulsified and dissolved oil coexist | Requires a multi-stage process combination |
| BOD/COD | Relatively low (150-670 mg/L) | Biological treatment is difficult; physico-chemical methods must dominate |
Treatment difficulties
Demulsifying emulsified oil is hard: oil droplets below 10 μm require special coalescing media for separation.
Wide compositional variation: oil and suspended solids differ greatly between sources, so the process must be flexible.
Stringent environmental standards: must meet the Integrated Wastewater Discharge Standard or industry-specific limits (e.g. petroleum ≤10 mg/L).
Operating cost constraints: conventional processes (flotation plus membrane filtration) suffer from clogging, high energy use and frequent consumable replacement.
3. SINOKLE's new KHC coalescing oil separator process
To solve the difficulties of light oil tank farm water draw-off, SINOKLE has developed a new process built around the KHC coalescing oil separator. Wastewater first passes a pre-filter that removes most debris and suspended particles, then enters the KHC coalescing oil separator for advanced treatment; the effluent already largely meets discharge requirements. Under shock loading or poor water quality it can pass through an activated carbon filter for further treatment to ensure final compliance.

Process flow diagram of light oil tank farm water draw-off treatment
Core technical principles
SINOKLE's KHC coalescing oil separator integrates cyclone centrifugal separation, wetted coalescence, collision coalescence and interception filtration - four technologies in one:
Cyclone centrifugation: an inlet cyclone creates a centrifugal field that rapidly separates dispersed oil.
Wetted coalescence: super-oleophilic, hydrophobic fibre media adsorb fine oil droplets and form coalescing films.
Collision coalescence: optimised flow channels promote droplet collision and accelerate droplet growth.
Interception filtration: modular cartridges intercept residual oil droplets and suspended solids, ensuring effluent quality.
Equipment advantages
| Aspect | Conventional process | KHC coalescing oil separator |
|---|---|---|
| Oil removal efficiency | Emulsified oil removal < 80% | Removes emulsified oil > 0.1 μm; overall oil removal > 95% |
| Treatment time | Retention time > 30 minutes | Retention time < 3 minutes; more than 10 times more efficient |
| Fouling resistance | Clogs easily; frequent backwashing | Specially modified fibre resists breakage and corrosion, suiting high-solids duty |
| Operating cost | Cartridge life < 1 year | Cartridge life 2-5 years; modular design for easy replacement |
| Footprint | Multiple units in series; large area | Skid-mounted, highly integrated; saves over 50% of space |
4. Overall advantages of the new process
Efficient and stable: a single unit covers 5-150 m³/h, suitable for tank farms, refineries and similar sites.
Green and energy-saving: fully enclosed automatic operation with no secondary pollution; low energy use (< 0.5 kW·h/m3).
Intelligent maintenance: differential pressure monitoring and automatic backwashing reduce manual intervention.
Good economics: total cost of ownership (TCO) is 30%-40% lower than conventional processes.
Verified by cases: a petrochemical company using the KHC coalescing oil separator for oily wastewater with 15% (150,000 mg/L) inlet oil achieves stable compliance (≤50 mg/L), recovered oil with ≤0.1% water and more than RMB 2 million of oil recovered per year.
Conclusion
Through material innovation and process integration, SINOKLE's KHC coalescing oil separator effectively solves the oily wastewater problem at light oil tank farms, achieving efficient, economical and environmentally sound treatment and offering the petrochemical industry a new-generation solution.