Process Solution for Oily Wastewater Treatment at Heavy Oil Tank Farms
In the petrochemical industry, oily wastewater from heavy oil tank farms is a special industrial wastewater whose treatment has always been a technical challenge. Storage, loading and transport of heavy oil inevitably generate large volumes of oily wastewater containing high concentrations of petroleum substances together with suspended solids, silt and dissolved impurities - an extremely complex composition that poses a potential threat to the environment and ecosystems.
1. What is oily wastewater at a heavy oil tank farm?
In short, it is wastewater containing large amounts of oil generated during the operation of a heavy oil tank farm. The oil comes mainly from leakage, evaporation and washing of products and mixes with rainwater and washdown water in the tank area. Heavy oil is highly viscous, dense and hard to emulsify, which makes this wastewater significantly harder to treat.
2. Characteristics of this wastewater and treatment difficulties
The wastewater's oil is mainly heavy oil, highly viscous and dense, with a high content of suspended solids of varying particle size. These characteristics create many difficulties. First, the high viscosity of heavy oil defeats conventional oil-water separation, so oil cannot be separated effectively. Second, the complex composition readily causes secondary pollution during treatment, further raising difficulty and cost.
3. Conventional processes and their shortcomings
Conventional treatment of heavy oil tank farm wastewater includes gravity oil separators, flotation and filtration. Gravity separators rely on the density difference between oil and water but remove only most free oil, with limited effect on emulsified and dissolved oil. Flotation removes some emulsified oil but performs poorly on heavy oil and is sensitive to water quality fluctuations. Filtration clogs readily when treating water with high suspended solids, requiring frequent media replacement and high operating costs. These shortcomings make it hard to meet discharge standards reliably.
4. SINOKLE's new treatment process
To address these difficulties, SINOKLE has combined its core patented CDFU and KFM equipment to develop a new treatment process. The process uses two stages of CDFU cyclone dissolved-gas flotation for oil and suspended-solids removal: cyclone and dissolved-gas technology bring micro bubbles into full contact with, and attachment to, oil droplets and solids for efficient separation. After two stages most oil and suspended solids are removed. The water then passes through a KFM active filter media filter for advanced treatment, removing remaining pollutants and ensuring compliant discharge.

Oily wastewater treatment at a heavy oil tank farm — process flow diagram
5. Features of the new process
SINOKLE's new process has many notable features. First, purely physical separation avoids the secondary pollution of chemical agents, giving a stable, reliable process with high oil removal efficiency. Second, the process is stable, the equipment compact and the footprint small, suiting space-limited heavy oil tank farms. The equipment also runs fully enclosed, eliminating waste gas leakage for greater environmental protection. Skid-mounted, automated design makes operation and maintenance simple, shortens construction and allows online implementation. The process is also highly shock-resistant and tolerates wide water-quality fluctuations, ensuring stable performance.
6. Application case
SINOKLE's new process has been successfully applied in the wastewater treatment project of a heavy oil tank farm at a petrochemical company. Influent petroleum content was as high as 10,000 mg/L with 500 mg/L suspended solids. After treatment, effluent petroleum content fell below 10 mg/L and suspended solids below 20 mg/L, meeting discharge standards consistently. The case demonstrates the effectiveness and reliability of the process for heavy oil tank farm wastewater and offers a new solution for the petrochemical industry.