The Road to Innovation in Electric Desalting Wastewater Treatment
1. The electric desalting unit in the crude distillation unit
The electric desalting unit is an important part of crude oil processing, removing salts and water so that the crude can be processed normally. Because crude quality fluctuates widely, however, operation of the desalting unit is strongly affected, lowering desalting efficiency and the rate of desalted crude meeting salt specifications, which challenges equipment corrosion protection, secondary crude processing and the downstream wastewater treatment plant.
2. Characteristics of electric desalting wastewater and treatment difficulties
Characteristics:
Severe emulsification, carrying suspended particles with a density close to that of water, making gravity separation difficult.
Oil content fluctuates widely, up to 20%.
Contains sulphides, volatile phenols, VOCs and other harmful substances.
Contains resins and asphaltenes, tending to wax and plug piping.
Treatment difficulties:
Emulsified oil is hard to separate.
Oil content fluctuates widely, beyond the capability of conventional equipment.
Harmful substances require attention to safety and environmental protection during treatment.
Waxing and pipe plugging increase treatment difficulty.
3. Conventional processes and their shortcomings
Gravity separation: almost no effect on emulsified oil; poor oil removal.
Centrifugal separation: readily causes re-emulsification of oil in the water; unsuitable for emulsified oil.
Membrane systems: costly and prone to fouling; hard to apply at scale.
Chemical oil removal: produces large volumes of high-water-content oily sludge and causes secondary pollution.
Conventional flotation: unsuitable where oil content fluctuates widely; performance falls well short.
4. SINOKLE's new electric desalting wastewater process and its advantages
(1) SINOKLE's new process:
SINOKLE has adopted a new process built around two stages of its patented CDFU (cyclone dissolved-gas flotation) technology as the core equipment. With no chemical dosing, purely physical demulsification and separation achieve high oil-water separation efficiency within a short flotation time.

Process flow diagram of SINOKLE's new electric desalting wastewater process
(2) Advantages of SINOKLE's new process:
Efficient oil-water separation: effluent oil content below 10 mg/L.
Markedly lower harmful substances: reduces COD and H2S, limiting equipment damage and easing the load on the downstream wastewater plant.
Environmentally friendly and energy-saving: optimised equipment structure and process flow deliver advanced treatment with less energy consumption and secondary pollution.
Lower treatment costs: the new process cuts treatment costs and improves the company's economic performance.
5. Application case of SINOKLE's new electric desalting wastewater process


Electric desalting wastewater treatment at a petrochemical company
A petrochemical company uses SINOKLE's two-stage CDFU electric desalting unit: inlet oil content of ≤2000 ppm is reduced to ≤10 ppm in the effluent, with an average throughput of up to 100 m³ per hour - significant oil removal with stable compliance.