Hydrodynamic Cavitation for Wastewater Treatment: Principles and Ozone Synergy

2026-11-17 13:13:16
立即下载

1. Cavitation Phenomenon

Cavitation occurs when the pressure in a liquid is compressed by an external force to a sufficiently low critical pressure, causing cavities to form inside the liquid. These cavities are filled with vapor and the dissolved gases of the liquid. Under violent compression, the vapor- and gas-filled cavities implode, generating enormous implosive forces that create local hot spots and release large amounts of energy — temperatures can reach 500–15000 K and pressures 100–5000 atmospheres.

Fig. Schematic diagram of ultrasonic cavitation

Ultrasonic cavitation diagram

Besides the high temperature and pressure, cavitation also induces a wide range of physical and chemical changes. Under extreme cavitation conditions, water molecules can be split into several species with high oxidation potentials, including hydroxyl radicals (·OH), ·OOH and H2O2, which react with the organic compounds contained in wastewater. Meanwhile, the enormous implosive forces and shear forces generated by cavitation bubble collapse can break the molecular bonds of organic pollutants or pyrolyze them thermally, and destroy the cell walls of microorganisms, thereby degrading macromolecular organics and inactivating microorganisms in the wastewater. In addition, the microjets, local turbulence and micro-eddies produced by bubble collapse enhance gas–liquid mass transfer of the reactants and reduce the mass-transfer resistance of the system.

Cavitation is therefore considered an effective and promising technology, widely applied in disinfection, cell disruption, sludge treatment and organic degradation. In wastewater treatment, combining it with other technologies can reduce chemical dosage, improve efficiency and lower cost.

2. Hydrodynamic Cavitation

Depending on how cavitation is generated, it can be classified into four types: optical cavitation, particle-induced cavitation, acoustic cavitation and hydrodynamic cavitation. Compared with other cavitation technologies, hydrodynamic cavitation features large operating scale, good energy savings and simple equipment, making it one of the most promising wastewater treatment technologies today.

Hydrodynamic cavitation is usually generated by changes in the flow rate and pressure of the liquid. A throttling device narrows the cross-section of the flow channel; the pressure drops, converting pressure into velocity and kinetic energy. At the same time, boundary-layer separation and turbulence occur. Because of the local turbulent flow, a large amount of energy is permanently lost in the form of a pressure drop; as the liquid pressure decreases with increasing kinetic energy, cavities begin to form once the local pressure falls below the cavitation threshold.

When the pressure recovers or rises above the cavitation threshold, the cavities collapse, and the resulting microjets generate turbulence downstream of the constriction. This can be triggered by devices with specific structures; although their geometry and type differ, all of them mainly act as throttling devices. Hydrodynamic cavitation devices are usually divided into five types: Venturi tubes, orifice plates, rotational devices, turbine-based devices and others.

Fig. Orifice-plate hydrodynamic cavitation device

Orifice plate hydrodynamic cavitation device

3. Hydrodynamic Cavitation Combined with Ozone Catalytic Oxidation

Compared with hydrodynamic cavitation alone, synergistic technologies based on hydrodynamic cavitation offer better degradation efficiency. Combining hydrodynamic cavitation with other advanced oxidation processes not only promotes the degradation of pollutant molecules but also shortens treatment time and reduces oxidant dosage. Among these, catalytic ozonation has attracted wide attention in global environmental remediation thanks to its non-selectivity and environmental friendliness.

Ozone, with an oxidation potential of 2.07 eV, is generated by an ozone generator using air or oxygen as the gas source, and it exhibits strong oxidizing power in alkaline solutions. However, ozone alone reacts only with organic compounds bearing specific functional groups such as aromatic rings and unsaturated hydrocarbons, and is ineffective against saturated hydrocarbons, alcohols, aldehydes, ketones and carboxylic acids. Moreover, ozone decomposes easily into oxygen before it fully dissolves into the solution, weakening its oxidation effect.

The combination of hydrodynamic cavitation and ozone shows excellent synergy: under hydrodynamic cavitation conditions, ozone decomposes into ·OH with a higher oxidation potential of 2.8 eV, second only to fluorine (3.0 eV). On one hand, the combined system can significantly improve pollutant removal efficiency with less ozone; on the other hand, the process produces no by-products and causes no secondary pollution, saving energy and reducing operating costs.

Fig. Application case of an ozone advanced oxidation unit incorporating hydrodynamic cavitation

CDOF unit application case

CDOF unit site photo

The CDOF (Cyclonic Dissolved Ozone Flotation unit) developed by SINOKLE creatively integrates ozone advanced oxidation, cavitation-supercritical catalysis, cyclonic separation and dissolved-air flotation, achieving efficient combined removal of various refractory wastewaters, with good application results in multiple wastewater treatment projects.

Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service