What Is Softened Water? A Guide to Wastewater Treatment Terminology

2026-11-16 10:59:53
立即下载

Water hardness mainly comes from calcium ions (Ca2+) and magnesium ions (Mg2+) in the water. The core of softened water treatment is the sodium ion exchange method: when hardness-bearing raw water passes through the resin bed of an exchanger, the calcium and magnesium ions are adsorbed by the resin while sodium ions are released, converting scale-forming calcium and magnesium compounds into soluble sodium compounds that do not form scale; the water leaving the exchanger is softened water free of hardness ions. When the resin becomes saturated with calcium and magnesium ions to a certain degree, the hardness of the effluent rises, and the softener automatically regenerates the exhausted resin according to a preset program, passing a relatively concentrated sodium chloride solution (brine) through the resin to restore it to sodium-form resin.

A fully automatic sodium ion exchanger mainly consists of a multiport control valve, a controller, a resin tank (with an internal water distributor) and a brine tank. The controller sends commands to the multiport valve according to the set program, and the valve automatically completes the service, backwash, regeneration, displacement and fast rinse cycles. No salt solution pump is required and the equipment is simple; it can be widely used for industrial and domestic softened water production, such as feed water for steam boilers, heating and air-conditioning systems, pools and other water systems.

In addition, nanocrystal technology (Template Assisted Crystallization, TAC) uses the high energy generated by nanocrystals to pack the free calcium, magnesium and bicarbonate ions in water into nanoscale crystals, thereby preventing the free ions from forming scale.

Fields where softened water applies: bathrooms, kitchens, laundry, heating, boilers, central air-conditioning water supply and many other areas.

(1) It prevents scale buildup, frequent clogging and low thermal efficiency in household appliances and fixtures such as water pipes, water heaters, coffee machines, humidifiers, steam irons, bathtubs, shower heads and flush toilets.

(2) Coffee brewed and tea steeped with soft water tastes distinctive and pure. Flowers watered with soft water bloom longer, with spotless green leaves and vivid blossoms. Fish kept in soft water are less prone to various diseases. Rice cooked in soft water turns out full, fluffy and tasty; sanitary fixtures stay crystal clear without stains or spots.

CaSO4+Na2CO3=CaCO3↓+Na2SO4

(4) Soft water effectively inhibits fungi and promotes the regeneration of cell tissue, reducing the incidence of constipation, gastrointestinal disorders and stone diseases. In case of skin injuries, frostbite or burns, wash the affected area with soft water first, then gently wipe it with cotton wool, gauze or towels soaked in soft water; wounds heal quickly and swelling caused by burns subsides promptly, because soft water promotes cell tissue regeneration. In case of skin injuries, frostbite or burns, washing with soft water helps wounds heal quickly.

(5) For laundry, soft water prevents static electricity, fading and deformation; for tableware, it cleans without water spots and improves luster; for kitchens and bathrooms, it powerfully removes grime and odors. Soft water keeps washed clothing fibers from hardening or becoming brittle and saves on detergents.

(6) Soft water eliminates alkaline scale at the root, keeps equipment running safely and saves money: maintenance costs for water equipment and piping are reduced by more than 60%, hot water fuel costs by more than 30%, and detergent purchases by more than 50%.

Hard water refers to water rich in dissolved minerals, especially calcium and magnesium. Hard water poses no direct hazard to health, but it causes many inconveniences in daily life, such as scale on water appliances and reduced washing efficiency of soaps and detergents.

(Industry uses entirely different standards: generally only water with hardness below 1 is called soft water; water between 1 and 10 is often loosely called hard water, and water with hardness above 10 is often called high-hardness water)

Some water with very high calcium and magnesium content never forms scale, because those calcium and magnesium ions exist in the form of chlorides, which are soluble and therefore do not precipitate out on heating.

Water hardness has a great impact on daily life. Hard water makes laundry lather poorly; travelers may develop discomfort when drinking water of unfamiliar hardness; scale in kettles reduces heat conduction; scale in industrial boilers can cause explosion accidents. Therefore, hardness should be properly controlled in both domestic and industrial water. Drinking hard water (mineral water) frequently can lead to kidney stones.

The “soft water” and “hard water” commonly mentioned in daily life refer to the content of magnesium carbonate and calcium carbonate in the water, expressed as “milligrams of magnesium carbonate per kilogram of water” or “ppm”; this is called water hardness.

So what water hardness is appropriate? No recommended value has been formally issued by government agencies or academic societies; China’s inspection standard is below 1000 ppm.

Water hardness is generally classified into four levels:

1. Soft water: 0–60 ppm

2. Slightly hard water: 60–120 ppm

3. Hard water: 120–180 ppm

4. Very hard water: above 181 ppm

Soft water is natural water containing only small amounts of soluble magnesium and calcium salts, or hard water that has undergone softening treatment. Natural soft water generally refers to river, stream and lake (freshwater) water. In softened hard water, the magnesium and calcium salt content falls to 1.0–50 mg/L. Although boiling can temporarily turn hard water soft, for large industrial water demands this method is neither economical nor practical. For industrial water, the following methods can be adopted:

① Ion exchange. Although zeolite and ion exchangers are insoluble in water, the sodium and hydrogen ions in them can undergo exchange reactions with the calcium and magnesium ions in hard water, so the calcium and magnesium ions are adsorbed and removed by the zeolite, synthetic zeolite or ion exchanger. Zeolite and ion exchangers exhausted after long-term use can be regenerated and reused, so this is an economical and advanced softening method.

First measure the hardness of the water, then add a measured amount of calcium hydroxide and sodium carbonate; the calcium and magnesium ions in the hard water precipitate out:

Ca(HCO3)2+Ca(OH)2=2CaCO3↓+2H2O

Mg(HCO3)2+2Ca(OH)2=Mg(OH)2↓+2CaCO3↓+2H2O

(3) It extends the shelf life of tofu, makes soymilk more aromatic, and bean sprouts grow thick and sturdy without growth hormones. Washing vegetables with soft water removes pesticide residues and prolongs freshness. Rice cooks faster, with soft, smooth grains, and dough foods do not expand excessively. Cooking with soft water preserves the natural taste and nutrients of vegetables.

③ Phosphate softening. For boiler water, sodium phosphite (NaPO3) can be added as a softening agent; it forms complexes with calcium and magnesium ions, so they do not precipitate out when the water boils and no scale forms. This method is not suitable for softening drinking water.

1. Service: untreated water passes through the resin bed, where the exchange reaction occurs and soft water is produced.

2. Backwash: water enters from the lower part of the resin bed, fluidizing the resin and removing fine debris.

3. Brine regeneration: relatively concentrated brine (NaCl) flows through the resin, restoring the exhausted resin to usable sodium-form resin.

4. Rinse: water flows through the resin as in service, washing out the excess brine and the calcium and magnesium ions displaced during regeneration.

5. Refill: water is fed into the brine tank to dissolve the salt for the next regeneration.

CaCO3+2Na-R=Ca-R+Na2CO3

Ca(HCO3)2+2Na-R=Ca-R+2NaHCO3

MgCO3+2Na-R=Mg-R+Na2CO3

Mg(HCO3)2+2Na-R=Mg-R+2NaHCO3

A strongly acidic color-change cation exchange resin, mainly used for hard water softening, pure water production, household water dispensers, water purifiers and more. In service, the condition of the resin can be observed directly through its color change. The product is green spherical beads that turn purple when exhausted, and it can be regenerated and reused repeatedly.

Moisture content: 43.00–48.00%

Mass exchange capacity: ≥4.40 mmol/g

Volume exchange capacity: ≥1.90 mmol/ml

Wet bulk density: 0.78–0.88 g/ml

Wet true density: 1.250–1.290 g/ml

Particle size range (0.315–1.250 mm): ≥95.0%

Fines (<0.315 mm): ≤1.0%

Effective particle size: 0.400–0.700 mm

Whole beads after attrition: ≥90.00%

Resin matrix: styrene/divinylbenzene copolymer

Physical form: insoluble amber beads

Shipped ionic form: sodium form

Total exchange capacity: ≥2.0 gram-equivalents per liter (sodium form)

Specific gravity: 1.26 to 1.30 (sodium form)

Moisture retention: 43 to 47% (sodium form)

Shipping density: 850 g/liter (sodium form)

Average bead diameter: 650±50 µm

Fines content (<0.300 mm): 0.1% max

Oversize content (>0.850 mm): 10% max

Maximum reversible swelling: 10% when converted from sodium form to hydrogen form

Strongly acidic color-change cation exchange resin

Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service