Explained: The Latest and Most Effective Process Technology for High-Oil Sour Water
What is high-oil sour water?
High-oil sour water is a special industrial wastewater that originates in the processing of petroleum and its by-products. In atmospheric and vacuum distillation, catalytic cracking, delayed coking, catalytic hydrogenation and other processes, sulphur and nitrogen compounds are converted into H2S and NH3-N through high-temperature cracking, catalytic cracking and hydrocracking. These substances pass into the downstream process and, after condensation, dewatering or water washing, form sulphur- and ammonia-bearing wastewater. Because it contains large amounts of oil, this wastewater is called high-oil sour water. High-oil sour water may be highly emulsified, with a high content of oil and acidic substances.

Highly emulsified sour water
Water quality characteristics of high-oil sour water:
It contains high concentrations of oil, acidic substances and suspended matter; the water is turbid and odorous and severely pollutes the environment.
Treatment difficulties of high-oil sour water:
High coke powder content with a fine particle size distribution, high oil content including emulsified oil, high levels of sulphides, ammonia nitrogen and phenols, and a complex pollutant composition with large fluctuations in concentration. These problems make treatment costly and demand substantial investment of funds and resources.
Common treatment methods for high-oil sour water:
Physical methods: settling, filtration and adsorption; simple to operate, but relatively inefficient and unable to remove the pollutants completely.
Chemical methods: treating the water with chemical reagents such as neutralisation and oxidation; efficient, but liable to cause secondary pollution.
Biological methods: degrading organic matter with microorganisms; environmentally sound, but demanding on water quality and slow.
SINOKLE's new process for high-oil sour water:
Addressing the treatment difficulties of high-oil sour water and drawing on the company patented technologies, SINOKLE has developed a process built around CDFU (high-efficiency compact cyclonic flotation) + fine filtration + KHC high-efficiency coalescing separator as the core equipment. The process steps are clear: first, CDFU technology removes most of the oil and suspended matter from the water, fine filtration then polishes the water quality, and finally the KHC high-efficiency coalescing separator removes the remaining fine particles and emulsified oil.
The core of this technology is its ability to remove emulsified oil down to 0.1 μm, bringing the oil content of the effluent below 10 ppm.
Advantages of the new process:
high treatment efficiency and good effluent quality;
little environmental impact, with no need for large amounts of chemical reagents;
simple operation and stable running;
significant economic benefits, lowering the treatment cost.

The treatment process for high-oil sour water is constantly being developed and improved, and new technologies bring new hope. In the future, as environmental awareness grows and technology advances, the treatment of high-oil sour water will become more efficient and more environmentally friendly.

CDFU Technical features