Cyclonic Dissolved Gas Flotation: A New Breakthrough in Electric Desalting Wastewater Treatment

2026-11-16 09:43:53
立即下载

1. Electric desalting wastewater

Definition: electric desalting wastewater is the effluent produced during crude oil processing when salts (mainly NaCl, MgCl₂, CaCl₂ and other chlorides) and water are removed from the crude by the electric desalting process.

Source: desalter effluent and desalter backwash water.

2. Characteristics and treatment difficulties

Characteristics:

  • High oil content: the wastewater contains large amounts of emulsified and dispersed oil.

  • Severe emulsification: oil droplets are tightly bound to water molecules, forming a stable emulsion.

  • High suspended solids: the wastewater carries a large amount of suspended matter, which degrades water quality.

Treatment difficulties:

  • Emulsified oil is hard to demulsify and separate, and conventional methods are inefficient.

  • Suspended solids are difficult to remove, which easily overloads the downstream wastewater treatment plant.

  • The wastewater composition is complex and places high demands on the treatment process.

3. Conventional processes and their shortcomings

Conventional processes:

  • Gravity settling and chemical demulsification;

  • filtration and adsorption.

Shortcomings:

  • Poor demulsification of emulsified oil and low treatment efficiency.

  • Incomplete removal of suspended solids, which easily causes secondary pollution.

  • Complex process, high operating cost and difficult maintenance.

  • Poor adaptability to changes in wastewater composition and unstable treatment performance.

4. The new process and its advantages

Process steps:

  • Pre-treatment: after heat exchange and cooling, the desalter effluent enters a high-efficiency coalescing pressure deoiler for preliminary oil removal.

  • Cyclonic dissolved gas flotation: the deoiled wastewater enters the cyclonic dissolved gas flotation tank, where the combined action of cyclonic centrifugal force and micro-bubbles breaks the emulsion; most of the emulsified oil and suspended solids are captured and attached by the micro-bubbles and float to the surface for separation.

  • Post-treatment: once the treated water meets the specification it is discharged to the wastewater treatment plant network, while the scum is sent to a slop oil collection tank.

sinokle


Core technologies:

  • Cyclonic dissolved gas flotation: it organically combines cyclonic centrifugal separation with ultra-fine bubble flotation to remove emulsified oil and suspended solids quickly and efficiently.

  • High-efficiency coalescing pressure deoiler: specially designed patented coalescing packing coalesces free and dispersed oil into large droplets that agglomerate into low-water crude oil, allowing effective recovery of the slop oil.

sinokle

Advantages:

  • High removal efficiency: removal efficiency reaches over 80% for emulsified oil and suspended solids above 2 microns, overall oil removal efficiency reaches 95%, and suspended solids removal efficiency reaches over 85%.

  • Stable operation: short effective residence time (3~5 min), small system pressure drop (0.05 MPa), a wide operating temperature range (0~85 °C) and strong adaptability.

  • Energy saving and environmental protection: the dissolved gas water flow and the flotation gas flow can be adjusted flexibly to the actual wastewater conditions, giving low operating cost and little environmental impact.

  • Simple operation: a high degree of automation and easy maintenance reduce labour costs.


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service