Quartz Sand Filter Media: Grades, Purification Methods and Specifications
Quartz sand is the classic granular filter medium. Used inside a filter vessel, it intercepts suspended solids, colloids and similar particulate impurities and so clarifies the water. Media are supplied in several grades.
Grades of Quartz Sand Media
1. Ordinary quartz sand media. Used mainly in wastewater treatment, a bed will serve three to five years provided the sand is not washed out of the vessel. Contamination is not a problem in this duty, because the sludge in a wastewater plant respires aerobically or anaerobically and degrades the pollutants that load the bed.
2. Refined quartz sand media. Used in pure water treatment. In a sand filter a refined bed generally has to be replaced every two to three years: once contaminants coat the grains, filtration performance cannot be restored, and replacement is the only remedy. Refined media are certified to ISO 9001-2000. They are stable in neutral water and in acidic water within the stated pH range, but dissolve slightly in alkaline water; in chemical water treatment the resulting silica increase is no more than 2 mg/L.
Raising the Grade of Raw Sand
Industrial-grade quartz deposits are declining in purity, and beneficiation is used to bring raw sand up to specification. The main methods are as follows.
1. Scrubbing and desliming. Mechanical force and grain-to-grain abrasion strip the iron film, the bonded material and the clayey impurities from the grain surface and break up aggregates that have not yet separated into individual grains; classification then completes the upgrade. Rod-mill scrubbing and mechanical scrubbing are both used. The main influence on scrubbing performance is the design and configuration of the scrubbing machine; scrubbing time and scrubbing density are secondary, with a density of 50 to 60 percent generally preferred.
2. Magnetic separation. Magnetic separation removes the magnetic minerals. A high-intensity separator takes out weakly magnetic minerals such as hematite, limonite and biotite, while strongly magnetic minerals such as magnetite are removed on a low-intensity separator.
3. Flotation. Flotation removes feldspar, mica and similar impurities that magnetic separation cannot touch, raising purity further.
4. Acid leaching. Quartz does not dissolve in acid other than hydrofluoric acid, whereas many impurity minerals do, so acid leaching purifies the sand further.
5. Microbial leaching. Microbial leaching uses micro-organisms to strip the iron film or the disseminated iron from the grain surface. It is a comparatively recent iron-removal technique.
Common Specifications
Media are graded by particle size: 0.5–1.0 mm, 0.6–1.2 mm, 0.8–1.6 mm, 1.0–2.0 mm, 2.0–4.0 mm, 4.0–8.0 mm, 8.0–16 mm and 16–32 mm. The grade is matched to the filtration duty and to the design filtration rate.
The Standard for Power Plant Water Treatment
In China, quartz sand media for power plant water treatment are specified by DL/T 336-2010, the electric power industry standard issued by the National Energy Administration, which sets out the technical requirements, the test items and the evaluation method.
The standard requires the particle size, density and uniformity coefficient to meet CJ/T 43 and DL/T 5190.4, and it refers to DL/T 5068 (technical code for chemical design of fossil-fuel power plants), DL/T 5190.4 (technical code for construction and acceptance of electric power construction, Part 4: power plant chemistry), CJ/T 43 (filter media for water treatment) and GB/T 12149 (determination of silica in industrial circulating cooling water and boiler water). Its substantive requirements are that the media be hard, dense grains; that they look milky white or colourless and transparent, with no visible soil, fines or other impurities; that the size distribution be selected as DL/T 3068 requires; and that the dissolution products be measured under the conditions the standard defines, in water that means demineralised water at the secondary level unless otherwise stated.
Quartz Sand as an Industrial Mineral
Quartz sand is an important industrial mineral raw material, not a hazardous chemical. It is used across glassmaking, foundry work, ceramics and refractories, ferrosilicon smelting, metallurgical fluxing, construction, chemicals, plastics, rubber and abrasives, and it can be shipped by road or rail. Its main uses are:
Glass. The principal raw material for flat glass, float glass, glassware such as jars, bottles and tubing, optical glass, glass fibre, laboratory glassware, conductive glass, glass cloth and radiation-shielding special glass.
Ceramics and refractories. Body and glaze for porcelain, and the raw material for high-silica kiln bricks, ordinary silica bricks and silicon carbide refractories.
Metallurgy. Raw material, additive or flux for silicon metal, ferrosilicon and aluminium-silicon alloys.
Construction. Concrete, cementitious materials, road stone, artificial marble, and the reference sand used in testing the physical properties of cement.
Chemicals. Raw material for silicon compounds and water glass, packing for sulphuric acid towers, and amorphous silica micro-powder.
Machinery. The main raw material for foundry moulding sand and for abrasives — blasting sand, hard abrasive paper, sandpaper and emery cloth.
Electronics. High-purity silicon metal and optical fibre for communications.
Rubber and plastics. A filler that improves wear resistance.
Coatings. A filler that improves acid resistance.
Aerospace. Its molecular chain structure, crystal habit and lattice behaviour give it high temperature resistance, a low coefficient of thermal expansion, high electrical insulation, corrosion resistance, piezoelectric and resonance effects, and distinctive optical properties.
Media made from natural quartz deposits by quarrying, crushing, washing and screening — with acid washing for the high-purity grades — have high mechanical strength and stable chemical behaviour, and they meet the Ministry of Construction standard CJ/T 43-2009.