Wastewater Abbreviations Explained: COD, BOD, SS, TN, TP, TDS, TOC, MLSS, MLVSS, SVI and SV

2026-11-13 13:07:46
立即下载

Wastewater treatment runs on abbreviations: the short codes for the parameters that describe how a plant is performing. Anyone working in the field needs to know them, not least because a misread abbreviation can lead to a plant being operated the wrong way. The common ones are collected below.

1. COD — Chemical Oxygen Demand

COD is the amount of reducing substance in a water sample that can be oxidised, measured chemically. Under defined conditions it is expressed as the milligrams of oxygen equivalent to the oxidant consumed by the reducing substances in one litre of sample, in mg/L. It indicates how heavily the water is polluted by reducing matter: the higher the COD, the worse the pollution. Two variants are used in monitoring: COD Cr, with potassium dichromate as the oxidant, and COD Mn, with potassium permanganate.

2. BOD — Biochemical Oxygen Demand

BOD is the dissolved oxygen consumed over a given period while micro-organisms break down the oxidisable matter, mainly organic matter, in a given volume of water. It is expressed in mg/L, as a percentage or in ppm, and it is a composite indicator of the organic pollutant content. The higher the BOD, the more organic pollutant the water carries and the more serious the pollution.

3. SS — Suspended Solids

SS is the solid matter suspended in water: inorganic and organic particles that do not dissolve, together with silt, clay and micro-organisms. The suspended solids content is one of the measures of how polluted a water body is, and higher values mean worse pollution.

4. TN and TP — Total Nitrogen and Total Phosphorus

TN is the sum of inorganic and organic nitrogen in all its forms, including nitrate, nitrite and ammonium nitrogen together with the organic nitrogen in proteins, amino acids and organic amines. It is calculated as milligrams of nitrogen per litre and is routinely used to express how far a water body has been enriched with nutrients: the higher the value, the worse the pollution.

TP is the sum of phosphorus present in inorganic and organic form. It is one of the measures of water pollution, and the larger the value, the more polluted the water.

5. TDS — Total Dissolved Solids

TDS is the total of dissolved constituents: ions, molecules and compounds dissolved in the water, excluding suspended solids and dissolved gases. It represents the dissolved impurity content, and the larger the TDS, the more impurity the water carries and the worse the pollution.

6. TOC — Total Organic Carbon

TOC is the total organic carbon, and it reflects how far a water body has been polluted by organic matter.

7. BOD5

BOD5 is the biochemical oxygen demand measured over the standard five-day period, written BOD5 to distinguish it from the ultimate demand.

8. MLSS — Mixed Liquor Suspended Solids

MLSS is the concentration of suspended solids formed by the wastewater and the activated sludge together in the aeration tank of an activated sludge plant.

9. MLVSS — Mixed Liquor Volatile Suspended Solids

MLVSS is the same measurement with the inorganic fraction excluded, so it represents the mass of active micro-organisms in the sludge.

10. SVI — Sludge Volume Index

SVI is the volume occupied by one gram of activated sludge suspended solids after mixed liquor from the aeration tank has stood for 30 minutes in a 1000 mL cylinder, expressed in mL/g and usually written SVI30.

11. SV — Sludge Settling Ratio

SV, usually written SV30, is the ratio of the settled sludge volume to the total mixed liquor volume after mixed liquor from the aeration tank has stood for 30 minutes in a 1000 mL cylinder.

Reading the Numbers Together

The influent parameters — COD, BOD, SS, TN, TP, TDS and TOC — describe what has to be removed. The mixed liquor parameters — MLSS, MLVSS, SV30 and SVI — describe the state of the biomass that does the removing, and they are the figures an operator watches day to day to decide whether to waste sludge, raise aeration or adjust the return ratio.

Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service