Electrodesalting Draw-off Water Treatment Innovation: Breaking the Oily Wastewater Treatment Bottleneck in the Refining Industry
1. Background and treatment challenges of electrodesalting draw-off water
In the petroleum refining process, the salt and water entrained in the crude oil (existing in dissolved or emulsified form) need to be pretreated by the electrical desalting process to ensure stable operation of the subsequent distillation units. The electrodesalting draw-off water produced in this step accounts for about 3% of the refinery's total wastewater volume; its water quality characteristics have a significant impact on the downstream wastewater treatment system, and it must undergo professional pretreatment before being incorporated into the comprehensive wastewater treatment system.
The current treatment field faces dual challenges: on the one hand, crude oil quality shows a trend of becoming heavier and inferior; to enhance recovery, water injection operations and the amount of chemical aids continue to rise, significantly increasing the complexity of wastewater composition; on the other hand, to improve the comprehensive utilization rate of crude oil, the re-refining process of preliminarily treated heavy dirty oil further aggravates crude oil emulsification, causing the electrodesalting draw-off water quality to deteriorate continuously.
2. Process innovation: breakthrough in cyclonic dissolved air flotation technology
To address the pain points of a refining enterprise's electrodesalting draw-off water treatment — high residue content (up to 40%), frequent shock conditions, and failure of the traditional process — the technical team innovatively adopted the compact cyclonic dissolved air flotation unit (Cyclonic Dissolved Gas Flotation Unit, abbreviated as CDFU). This equipment integrates the three core technologies of centrifugal separation, dissolved air flotation and ultrafine bubble generation, forming a synergistic treatment effect and achieving efficient separation of oily wastewater and suspended solids.

Electrodesalting draw-off water treatment process flow diagram
Application example of a petrochemical enterprise in Xinjiang:
Process configuration: build an "oil remover + two-stage CDFU" combined process; the first stage achieves initial oil-water separation through physical demulsification technology, and the second stage adopts an enhanced treatment mode
Operating mechanism:
Oil remover and first-stage CDFU unit: physical demulsification technology removes the vast majority of the floating oil, and the recovered oil is recycled for resource utilization
The second-stage CDFU unit: only a trace amount of flocculant is dosed at the end, achieving deep purification through ultrafine bubble adsorption
Treatment results: the effluent quality is significantly improved, meeting the influent standards of the wastewater plant, and the operational stability of the system is greatly enhanced

3. Value of technical innovation
Compared with traditional treatment schemes, this process system shows three major advantages:
Significantly enhanced shock resistance: specially designed for extreme conditions with high residue content (40%), ensuring stable system operation
Improved resource utilization: oil-water separation technology recovers the dirty oil, reducing the amount of hazardous waste generated
Optimized operating costs: reduced chemical usage, eliminated the oil drying device, and lower land occupation and treatment costs
This technical solution provides a new solution for oily wastewater treatment in refining and chemical enterprises, is especially suitable for production scenarios with large crude oil quality fluctuations and high treatment loads, and has demonstration significance for promoting the green transformation of the industry.