Efficient Removal Methods for Electrodesalting Wastewater

2026-11-13 10:56:40
立即下载

1. Electrodesalting wastewater

Crude oil often contains salt and water (dissolved in the oil or in an emulsified state), which need to be removed through the electrical desalting process before entering the distillation unit. The electrical desalting process produces wastewater accounting for about 3% of the refinery's total wastewater volume, called electrodesalting wastewater.

Treatment difficulties:

  • Emulsified oil is difficult to separate: the emulsified oil in crude oil is stable and difficult to remove by conventional methods.

  • Low suspended solids removal efficiency: traditional methods such as sedimentation and filtration have limited effect on suspended solids removal.

  • Water quality fluctuation affects treatment performance: large water quality fluctuations lead to unstable treatment processes, and the effluent quality is difficult to guarantee.



2. SINOKLE electrodesalting wastewater treatment solution

The electrodesalting wastewater of a petroleum refining and chemical plant had a high residue content and frequent shock conditions. Under shock conditions, the original crude process could no longer treat the electrodesalting wastewater; the plant built tens of thousands of cubic meters of storage tanks as buffers, occupying a large area, and due to the addition of chemicals, the recovered oil had a high water content, the waste residue could not be treated, and an oil drying device also had to be equipped, resulting in high operating costs.

To address the difficulties of electrodesalting wastewater treatment, SINOKLE combined its core technology product, the compact cyclonic dissolved air flotation unit (English name Cyclonic Dissolved Gas Flotation Unit, abbreviated as CDFU), which effectively integrates centrifugal separation technology, dissolved air flotation separation technology, ultrafine bubble generation technology, etc., and can efficiently separate oily and suspended-solids wastewater.

sinokle

A petrochemical enterprise in Xinjiang CDFU industrial plant site photo

Because the water quality under shock conditions at this plant was harsh (residue content up to 40%), an oil remover plus two-stage CDFU cyclonic dissolved air flotation process was adopted, in which the oil remover and the first-stage CDFU cyclonic dissolved air flotation use physical demulsification separation technology to remove most of the oily pollutants, and the collected oil is recycled.

sinokle

Electrodesalting wastewater treatment process diagram

Only a small amount of flocculant is added in the second-stage CDFU cyclonic dissolved air flotation; the effluent is clear and transparent and meets the wastewater plant reception indicators.

sinokle

On-site pilot test equipment photo

3. Influent and effluent indicators

sinokle

Item Influent/Effluent Indicator

4. Treatment results

sinokle

From left to right: influent, oil remover effluent, first-stage CDFU effluent, second-stage CDFU effluent



Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service