SINOKLE Heterogeneous Ozone Catalyst: Catalytic Mechanisms and Engineering Practice under Multiple Water Quality Conditions

2026-11-13 10:56:08
立即下载


1. Technical background and industry challenges

Ozone oxidation, as the core technology of advanced oxidation processes (AOPs), with its strong oxidizing power (E⁰=2.07V) and clean characteristics, has become an important means of treating refractory organics. However, traditional ozone oxidation has three major technical bottlenecks: low ozone mass transfer efficiency (usually <60%); incomplete mineralization of organics (intermediate products may become more toxic); high operating energy consumption (power consumption per ton of water > 3.5 kWh).

Compared with homogeneous catalysts (such as Fe²⁺/H₂O₂), heterogeneous ozone catalysts have the following advantages: No metal leaching (meeting GB 8978-1996 heavy metal discharge standards); Reusable (lifespan usually > 5 years); Wide pH adaptability (stable activity within the pH 3-10 range). Through ten years of technical research, SINOKLE has developed a series of heterogeneous ozone catalysts and made major breakthroughs in material design and engineering applications.


2. Technical principles and material innovation

The core design concept of SINOKLE catalysts lies in the "precise regulation of active sites + hierarchical pore synergy" strategy. This strategy optimizes the catalyst performance by constructing a three-level pore system and implementing surface modification technology. The three-level pore system specifically includes:

Macropores (> 50nm): ensuring mass transfer efficiency and promoting rapid diffusion of reactants and products.

Mesopores (2-50nm): increasing the exposure of active sites and improving the efficiency of catalytic reactions.

Micropores (< 2nm): effectively increasing the specific surface area and providing more active sites for the catalytic reaction.

In addition, the surface of the heterogeneous catalyst has also undergone hydroxylation treatment: through the treatment the surface -OH density is raised to over 5/nm², enhancing the hydrophilicity and activity of the catalyst. Surface hydrophilic modification: making the contact angle < 10°, further optimizing the catalyst performance in humid environments. Using advanced atomic layer deposition (ALD) technology, a core-shell structure with unique properties is carefully prepared. The core of this structure is MnFe₂O₄ spinel, a material that, thanks to its excellent electron conductivity, serves as an efficient channel for electron transfer. The shell uses a specially designed CeO₂-x defect layer, in which the oxygen vacancy concentration is precisely controlled to be greater than 10¹⁵/cm³. Through ALD technology's precise control, every layer of atoms is deposited exactly as predetermined, thus forming this core-shell structure with excellent performance. The synergy between the core and the shell gives this structure outstanding performance in electron transfer and catalytic reactions.

 sinokle

SINOKLE series heterogeneous ozone catalysts


3. Catalytic performance under different water quality conditions

1) Wastewater with high organic load

Wastewater type: ethylene wastewater from a large petrochemical enterprise

Water quality characteristics: COD: 1500-2000 mg/L

BTEX: 180-250 mg/L

Petroleum: 80-120 mg/L

Treatment results:

Parameter

Blank ozone

SINOKLE catalyst

COD removal rate

42%

83%

Benzene removal rate

51%

95%

Ozone consumption

3.2kgO₃/kgCOD

1.7kgO₃/kgCOD

The Mn³⁺/Mn⁴⁺ redox couple on the catalyst surface can specifically activate benzene ring structures, Intermediate product testing shows that toxic intermediates such as phenol are completely degraded within 5 min.

C₆H₅CH₃ + 8·OH → 3CO₂ + 5H₂O

2) High-salinity wastewater

Wastewater type: reverse osmosis concentrate from a coastal chemical plant

Water quality indicators: TDS: 58,000 mg/L (including Cl⁻ 32,000 mg/L); COD: 650 mg/L (containing chlorinated organics)

Technical breakthroughs:

Chloride poisoning resistance: : the CeO₂ shell forms stable complexes with Cl⁻ (Ce-O-Cl), and the yield of chlorine radicals (·Cl) is <0.1%.

Long-term stability: after 180 days of continuous operation the activity decreased by only 7% (conventional catalysts >30%)

3)Refractory organic wastewater

Wastewater type: antibiotic API production wastewater from a certain plant

Water quality data: initial norfloxacin concentration: 85 mg/L

Post-treatment ecotoxicity (luminous bacteria inhibition rate): from 92% down to 8%

Degradation pathway analysis:
LC-MS detection shows that the catalyst preferentially attacks the antibiotic's piperazine ring (C-N bond cleavage) and quinolone core (π-π interaction promotes adsorption)

Through multi-scale material design and surface reaction regulation, SINOKLE heterogeneous ozone catalysts demonstrate excellent performance in various difficult-to-treat industrial wastewaters: the COD removal rate is generally improved by 30-50 percentage points, the ozone utilization rate is stably above 98%,, and the catalyst life reaches 5 years (industry average 2-3 years)


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service