Wastewater Solution for Fuel Power Plant Oil Depots

2026-11-13 10:55:36
立即下载

1. Introduction to fuel power plant oil depot wastewater

A fuel power plant uses the heat generated during the combustion of fuels (such as coal, petroleum, natural gas, etc.) to heat water into high-temperature, high-pressure steam; the steam drives the steam turbine to rotate, and the turbine in turn drives the generator, thereby converting the chemical energy of the fuel successively into heat energy, mechanical energy and finally electrical energy. Bangladesh has certain natural gas reserves, and natural gas is the main fuel of its fuel power plants.

Although natural gas is the main energy source of the power plant, heavy oil can be used as a backup fuel when the natural gas supply fails, the pipeline is under maintenance, the gas source is insufficient, or in other emergencies. The heavy oil stored in the heavy oil depot can ensure that the power plant quickly switches fuels and continues to generate electricity when the natural gas supply is interrupted, maintaining the stability of the power supply, avoiding blackout accidents caused by fuel shortages, and ensuring the normal operation of the grid and reliable power supply to users.

Heavy oil depot wastewater of natural gas power plants is polluting wastewater generated during heavy oil storage, transportation and related operations, mainly including oil tank cleaning wastewater, ground washing wastewater, initial rainwater and equipment cooling wastewater. These wastewaters contain a large amount of heavy oil, diesel and other oils, suspended solids such as sediment, rust and dust, as well as COD and heavy metals. The water quality is relatively complex and the water volume fluctuates greatly, requiring special oil removal processes and equipment for pretreatment.

2. Fuel power plant oil depot wastewater treatment process

The general treatment process for fuel power plant oil depot wastewater is pretreatment (oil separation tank/equalization tank) - physicochemical treatment (coagulation sedimentation/flotation) - biochemical treatment (hydrolytic acidification/aerobic treatment) - advanced treatment (filtration/reverse osmosis) - sludge treatment (sludge thickening/dewatering/disposal).

Pretreatment mainly uses standing or inclined-plate oil separation to separate the floating oil and dispersed oil in the wastewater and make them float to the water surface to be collected, which can remove most of the larger oil droplets and reduce the load of subsequent treatment units. Since the water quality and quantity of the wastewater may fluctuate, an equalization tank is sometimes set up to balance the water quality and quantity, providing stable inlet conditions for subsequent treatment. At the same time, stirring devices can be installed in the equalization tank to prevent suspended solids from settling.

Physicochemical treatment uses flotation or coagulation on the basis of pretreatment to further remove oils and colloids from the wastewater and reduce the organic content of the wastewater.

After pretreatment and physicochemical treatment, the wastewater uses the microbial metabolism of anaerobic/aerobic bacteria to decompose ammonia nitrogen and dissolved organics into harmless substances such as nitrogen, carbon dioxide and water.

After biochemical treatment, the wastewater still contains some refractory organics. Advanced treatment usually uses sand filtration or activated carbon filtration to intercept these organics, further improving the effluent quality so as to meet the discharge standard.

The sludge generated during the treatment process, after the water is removed from the sludge by gravity or mechanical means, can be sent to sanitary landfill, incineration or composting.

3. SINOKLE technology

The traditional heavy oil depot wastewater treatment process for natural gas fuel power plants usually covers five core treatment units, each nesting 2-3 levels of sub-treatment processes, showing the characteristics of a long process chain and a complex system. Among them, the biochemical treatment step, as the key unit for pollutant degradation, has microbial flora that are significantly sensitive to environmental changes: on the one hand, trace toxic and harmful substances in the wastewater (such as heavy metal ions and petroleum pollutants) can easily inhibit microbial activity or even inactivate the flora; on the other hand, the system has extremely strict requirements for water quality indicators (pH value, salinity, nutrient ratio) and water temperature conditions. Once the inlet water quality fluctuates sharply, such as a sudden rise in petroleum concentration or large changes in the COD value, the microbial metabolic efficiency will drop significantly, leading to deterioration of treatment performance. In addition, to maintain stable system operation, multiple operating parameters need to be continuously monitored and finely regulated; the operation procedures are cumbersome and place high demands on the professional competence and management level of the O&M personnel, invisibly increasing operating management costs and technical risks.

To address the limitations of the traditional treatment process, SINOKLE adopts a staged high-efficiency treatment technology system: the pretreatment stage uses cyclonic dissolved air flotation technology (CDFU), deeply integrating the advantages of ultrafine nano-bubble demulsification and hydrocyclone centrifugal separation. Ultrafine nano-bubbles efficiently demulsify emulsified oil droplets through gas-liquid interfacial tension; hydrocyclone centrifugal separation uses the centrifugal force field to accelerate oil droplet coalescence and separation, achieving rapid removal of emulsified oil. The post-treatment stage introduces an ozone advanced oxidation-flotation integrated device (CDOF), where the strong oxidizing power of ozone deeply degrades the refractory organics in the water, while the flotation process enhances the separation of pollutants, ensuring that the treated water quality fully meets the discharge standard and providing an efficient and stable solution for heavy oil depot wastewater treatment in natural gas fuel power plants.

 sinokle

Process flow diagram

In 2021, a fuel power plant in Bangladesh adopted a two-stage CDFU + KFM activated filter media filtration process; with the influent oil content ≤2000 mg/L, the effluent oil content is ≤10 mg/L and the oil removal rate reaches 99.5%.

sinokle 

Equipment on site

 

Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service