New Process for Refining and Chemical Electrodesalting Wastewater Treatment

2026-11-13 10:55:04
立即下载

Electrodesalting wastewater usually refers to the wastewater containing salt, oil and other pollutants produced in petroleum refining or chemical production after crude oil or industrial wastewater is treated by the electrical desalting process. This wastewater is characterized by high salt content, high oil content, high suspended solids, and possible heavy metals and organics, making it difficult to treat.

1. Introduction to the electrical desalting process

Application field: mainly used in refineries, where the electric field separates the salt, water and impurities in crude oil to prevent subsequent equipment corrosion and catalyst poisoning. Wastewater source: the drainage produced during the electrical desalting process, including the separated brine, oil droplets, suspended solids and residual chemicals (such as demulsifiers).

2. Main characteristics of electrodesalting wastewater

High salt content: contains a large amount of Cl⁻, Na⁺, Ca²⁺, Mg²⁺ and other ions, with the salt concentration reaching thousands to tens of thousands of mg/L.

High oil content: contains floating oil, emulsified oil and dissolved oil, requiring demulsification and separation. Suspended solids (SS): including sediment, colloids, etc. Organics: may contain toxic substances such as phenols, sulfides and cyclic compounds. Other pollutants: heavy metals (such as Fe, Ni), demulsifier residues, etc.

3. Difficulties in electrodesalting wastewater treatment

Salt inhibits microbial activity: traditional biochemical methods have low treatment efficiency for high-salinity wastewater. Difficult oil-water separation: emulsified oil requires special demulsification treatment. High corrosivity: high chloride ion concentration easily corrodes equipment.

SINOKLE CDFU technology achieves efficient treatment of the oil and suspended solids in electrodesalting wastewater up to standard, with obvious advantages over traditional flotation treatment technology.

sinokle

Electrodesalting wastewater treatment process flow diagram


CDFU: The cyclonic dissolved air flotation is a brand-new generation of green and efficient vertical-tank flotation equipment developed by our company. This equipment integrates hydrocyclone centrifugal separation technology, ultrafine bubble generation technology and dissolved air flotation technology, and through the organic combination of multiple technologies achieves efficient and rapid separation of oily pollutants, emulsified oil and suspended solids in wastewater. The oil removal rate of this equipment is >90% and the SS removal rate is >85%; it uses purely physical means for demulsification; the equipment is skid-mounted, automated and informatized and can provide remote expert services; it operates in a pressurized and closed manner, safe and environmentally friendly.

sinokle 

On-site wastewater treatment equipment

 sinokle

 

Efficient wastewater treatment achieved:

On-site equipment treatment data: influent oil content ≤20000 ppm, effluent oil content ≤500 ppm.



Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service