New Oil Depot Wastewater Treatment Process: Technical Breakthroughs and Innovative Practice
1. Definition and sources of oil depot wastewater
Oil depot wastewater is a pollution product unique to the petroleum industry, mainly generated from the cleaning of crude oil storage and transportation facilities (including storage tanks, pipelines, loading/unloading areas, etc.), equipment maintenance and accidental leakage. Its composition is complex, including both oily wastewater naturally separated from crude oil and pollutants such as petroleum hydrocarbons, suspended solids, heavy metals (such as lead, cadmium, mercury), volatile organic compounds (VOCs) and surfactants. It is listed as a key control object in the National Hazardous Waste Catalog, posing a continuous threat to water bodies, soil and ecosystems.
2. Treatment difficulties and characteristics of oil depot wastewater
1. High pollutant concentration: the petroleum content can reach 500-5000 mg/L, and the COD value generally exceeds 2000 mg/L
2. Complex and variable composition: the degree of oil-water emulsification is high; dissolved organics and suspended solids coexist, and multiple systems of "oil-in-water" and "water-in-oil" exist
3. Treatment process challenges: heavy metal ions are difficult to remove, and traditional processes can hardly solve oil removal, COD removal and heavy metal stabilization at the same time
4. Poor operating economics: traditional methods are often accompanied by high chemical consumption and large sludge production, and the cost per ton of water remains high
3. Technical bottlenecks of traditional treatment processes
The existing treatment system mainly adopts the "physicochemical + biological treatment" combined process:
- Pretreatment stage: preliminary oil-water separation through oil separation tanks and flotation devices
- Physicochemical treatment: coagulation sedimentation (PAC/PAM), adsorption (activated carbon) or chemical oxidation (Fenton method)
- Advanced treatment: multi-stage filtration or biological treatment (activated sludge method, MBR membrane bioreactor)
But there are significant defects:
1. Weak shock load resistance, with large effluent quality fluctuations
2. Large chemical dosage, with sludge production reaching 3%-5% of the treated water volume
3. Long process chain, with a land occupation usually exceeding 500 m² per thousand-ton treatment station
4. Incomplete control of volatile organic compounds, with a risk of secondary pollution
4. Analysis of SINOKLE's innovative process system
Based on 20 years of experience in oily wastewater treatment, SINOKLE has built a "three-stage enhanced separation + advanced oxidation" technology matrix:
Process flow diagram:
Raw water → CDFU (removes floating oil and suspended solids) → coalescing oil remover (demulsification and fine oil removal) → CDOF (deep oxidation) → intelligent filtration system → discharge up to standard

New oil depot wastewater treatment process flow
1. CDFU cyclonic dissolved air flotation unit
It adopts patented cyclonic micro-bubble technology (bubble diameter <30 μm) with self-cleaning release devices, raising the oil droplet removal rate to over 95% and shortening the hydraulic retention time to 1/3 of that of traditional DAF.
Coalescing oil removal system
Through gradient-density modified coalescing materials, efficient polymerization and separation of oil droplets above 10 μm is achieved, with a treatment load of up to 200 m³/h, 2-3 times that of conventional equipment.
3. CDOF ozone catalytic oxidation unit
Integrating a catalyst fixed bed with micro-nano bubble technology, the ozone utilization rate reaches over 99.98%, and the removal efficiency of refractory organics such as BTEX and polycyclic aromatic hydrocarbons exceeds 70%.

On-site of a petrochemical enterprise's oil depot draw-off water treatment project
5. Five major technical innovations of SINOKLE's process
Revolutionary improvement in treatment performance
- Effluent petroleum ≤5 mg/L, COD ≤100 mg/L, heavy metal compliance rate 99.9%
- Shock load resistance up to 150% of the design flow, adapting to water quality fluctuations
All-physical process innovation
- Chemical consumption reduced by 80%, sludge production reduced by 70%
- No secondary pollution risk, meeting cleaner production standards
Intensive intelligent control
- Modular design reduces the land occupation by 40%
- Equipped with an AIoT intelligent monitoring system, enabling unattended operation
Full life-cycle cost optimization
- Equipment life cycle extended to 15 years
- Cost per ton of water reduced by 45% compared with traditional processes
Patent technology cluster
- More than 20 national invention patents obtained
- Core equipment has passed API, ISO 9001 and other international certifications