Activated Sludge Basics: Biology, SV / MLSS / SVI Indicators and Common Operating Problems
What Is Activated Sludge?
Activated sludge is a flocculent biomass with strong adsorption and degradation capability, and its essence lies in being "alive." Natural rivers have self-purification capacity because microorganisms living in the water consume pollutants, restoring cleanliness - that living microbial community is exactly what "activated" means. Microorganisms are only part of activated sludge; it also includes the residues of microbial metabolism and the organic and inorganic matter adsorbed onto the flocs. The mixed liquor seen in an aeration tank is simply activated sludge suspended in water.
Zoogloea and Filamentous Organisms
Zoogloea-forming and filamentous bacteria are the two key structural components of activated sludge. Zoogloea are aggregates of floc-forming bacteria with slime or capsules; they adsorb impurities and free microorganisms from the wastewater, give the sludge good settleability, and shelter microfauna from being swallowed or poisoned. Filamentous organisms are the skeleton of the floc: growing and extending on the zoogloea framework, they allow the flocs to form larger particles while keeping the sludge sufficiently porous.
The two groups stand in a see-saw relationship: filamentous organisms grow well attached to the zoogloea but poorly when exposed in the mixed liquor. Under low-dissolved-oxygen conditions they proliferate massively and cause sludge bulking.
Growth Curve of Activated Sludge

Growth curve of activated sludge
Performance Indicators: SV, MLSS and SVI
Three indicators describe activated sludge performance: the sludge settling ratio (SV), the mixed liquor suspended solids (MLSS) and the sludge volume index (SVI).

SV is easy to measure but does not fully reflect sludge quality and quantity. Normal SV values in municipal plants are usually 20%-30%, while some industrial wastewater plants operate normally at SV values above 90%; each plant should determine its own optimum from operating experience.
MLSS reflects sludge quantity. The mixed liquor must maintain a relatively fixed sludge concentration to keep treatment performance and system stability; every activated sludge process has its own optimum concentration.
SVI comprehensively reflects flocculation and settling behavior. A too-low SVI indicates small flocs with poor activity; a too-high SVI indicates poor settleability - bulking is imminent or has already occurred.

Common causes of rising SVI in the aeration tank
Indicator Microorganisms
Stalked ciliates - Vorticella, Epistylis, Opercularia, Zoothamnium - dominate: the flocs settle and flocculate well; rotifers and other metazoa also appear under the microscope.
Large numbers of free-swimming ciliates such as Colpidium, Colpoda and Paramecium: the zoogloea are not yet well developed - the aeration system is still in start-up.
Large numbers of Anisonema-type gliding flagellates: anaerobic conditions have developed in the aeration tank.
Massive reproduction of amoebae and rotifers: over-aeration; settling performance is deteriorating.
Abundant Aspidisca, Testudinella and Trichocerca: the influent load is extremely low.
A sharp drop in Aspidisca: the mixed liquor has received shock loading or toxic substances.
Flagellates appear (usually only Bodo and Oikomonas): sludge performance is poor.
Both protozoa and metazoa disappear: the sludge is in extremely poor condition.
Slowly crawling protozoa such as Litonotus, Chilodonella and Stylonichia reappear (similar to the start-up phase): the sludge is gradually recovering.
Causes of Filamentous Bulking
Because of their large surface area, filamentous organisms outcompete zoogloea bacteria for food in the mixed liquor - carbon sources and other nutrients - and multiply massively, causing bulking.
The same large surface area favors their growth over zoogloea when water temperature is suitable.
Filamentous organisms thrive at low dissolved oxygen, so a DO drop can trigger filamentous bulking.
At low pH, fungal filaments survive better than zoogloea bacteria and overgrow.
Causes of Non-Filamentous Bulking
Non-filamentous bulking is a deterioration of settleability caused by abnormal physiological activity of the zoogloea bacteria. It takes two forms: one arises when the influent carries too much soluble organic matter - the sludge loading (F/M) is too high while nitrogen, phosphorus and other nutrients are insufficient, or dissolved oxygen in the mixed liquor is low; the other arises when the influent contains relatively toxic substances that poison the sludge, so bacteria cannot secrete enough viscous material to form flocs, sludge-water separation in the secondary clarifier fails and the sludge disintegrates. In practice, more than 90% of sludge bulking is caused by filamentous organisms and less than 10% by non-filamentous causes.
Sludge Aging
Aged sludge appears dark and dull with weakened bioflocculation; biological foam accumulates on the aeration tank surface; the flocs compress well but fine, poorly settling sludge particles remain in the supernatant, making the effluent turbid; sometimes a thin layer of floating sludge forms on the secondary clarifier and affects effluent quality. Two conditions cause it. First, high loading: abundant organics drive vigorous synthesis and decomposition metabolism, producing excess young sludge whose poor settling leaves free bacteria in the supernatant. Second, low loading: endogenous respiration dominates, and the sludge ages.
Causes of Rising Sludge
Excess surfactants and oils; pH too low or too high; salinity too high or changing too much; water temperature extremes; highly toxic substrates; over-aeration; oxygen deficiency in the mixed liquor; denitrification releasing nitrogen gas; excessive return sludge flow; sludge accumulation in the secondary clarifier; filamentous overgrowth.
Daily Monitoring Checklist for the Activated Sludge Process
Observe the color and odor of the sludge; check aeration effectiveness; watch the aeration time and aeration rate; monitor waste sludge discharge and return sludge flow; observe sludge conditions in the secondary clarifier.