A New Process for Oilfield Reinjection Water Treatment

2026-11-18 10:53:03
立即下载

I. Introduction to Oilfield Reinjection Water

As national environmental requirements keep tightening, wastewater treatment in oilfield production is receiving growing attention. Reinjection water technology emerged to meet both environmental standards and production needs: treated oilfield produced water is reinjected into the reservoir, closing the water loop and reducing environmental impact. The approach not only saves water but also prevents the damage that discharge would cause, and is an important part of sustainable oilfield development.

II. Difficulties in Oilfield Reinjection Water Treatment

Treating oilfield reinjection water involves many challenges.

  • First, as fields move into the middle and late stages of production, the water cut of the produced fluid rises steadily, making treatment harder.

  • Second, the wastewater carries high levels of oil, suspended solids, organics and other impurities, which places higher demands on equipment and technology.

  • In addition, conventional processes suffer from poor shock resistance, unstable results and difficult operation and maintenance, and struggle to meet current production needs.

Developing a new reinjection water process that is efficient, stable and environmentally sound is therefore particularly important.

III. Conventional Processes and Their Shortcomings

Conventional reinjection water treatment mainly includes inclined-plate settlers with walnut shell or fibre-ball filtration, and settling tanks with centripetal flotation plus multi-media filters. These processes have many shortcomings.

Inclined plates with walnut shell or fibre-ball filtration offer high permeability, but chemical dosing and aged oil reduce reliability and shock resistance, and product water quality is unstable.

Settling tanks with centripetal flotation and multi-media filters are complex, energy-intensive and costly to run, and their poor shock resistance also leaves product quality unstable.

In some processes the membrane modules adapt poorly to crude oil and long-term stability is low, while the high-salinity environment makes operation, maintenance and cost control difficult.

IV. SINOKLE's New Reinjection Water Process and Its Advantages

To address the shortcomings of conventional processes, SINOKLE has developed a completely new reinjection water process. The process is centred on CDFU cyclonic dissolved-gas flotation and combines KFM active filter media with modified inorganic membrane microfiltration to provide a complete solution for oilfield produced water.

sinokle

Process flow diagram of the new reinjection water treatment process


The process offers the following clear advantages:

  1. Mature process with strong shock resistance: the new SINOKLE process has been proven in practice and is mature and stable; it absorbs fluctuations in water quality and keeps treatment results reliable.

  2. Purely physical demulsification with good environmental benefits: demulsification is purely physical, needs no chemicals, avoids secondary pollution and delivers good environmental benefits.

  3. Short flow, small footprint, low cost: the flow is simple and clear, occupies little space, uses few operating units and is easy to run, greatly reducing treatment cost.

  4. Multi-stage dissolved-gas flotation and active filter media: depending on the influent conditions on site and the reinjection quality targets, the process flexibly applies multi-stage cyclonic dissolved-gas flotation and active filter media filtration, making downstream treatment more stable and reliable and improving efficiency.

  5. Advanced filtration ensures on-spec water quality: high-precision active filters and modified inorganic membrane microfiltration keep effluent consistently on spec and meet more demanding reinjection requirements.

sinokle

In summary, SINOKLE's new oilfield reinjection water process, with its clear advantages, shows broad prospects in this field. It raises treatment efficiency and water quality stability while lowering cost and environmental impact, giving strong support to sustainable oilfield development.


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service