Treatment Solution for Highly Emulsified Sour Water in Refining and Petrochemical Plants

2026-11-18 10:52:31
立即下载


Highly emulsified sour water from refining and petrochemical operations is an acidic aqueous solution formed after a series of refining processes, containing large amounts of emulsified oil, suspended solids and various complex components.

This wastewater has wide-ranging sources, mainly including atmospheric and vacuum distillation units, catalytic cracking units, coking units, hydrotreating units and hydrocracking units. In these units the sour water is formed when sulphur- and nitrogen-containing compounds generate acid gases through high-temperature cracking and catalytic cracking reactions, which are then absorbed by water.

Difficulties in treating highly emulsified sour water:

  • Emulsification is severe, with large numbers of fine oil droplets and suspended solids that are hard to separate effectively by conventional physical or chemical means.

  • The composition varies widely and fluctuates greatly, containing sulphides, ammonia nitrogen and other irritants, which makes treatment difficult.

Conventional methods: gravity settling, cyclonic removal of oil and coke fines, and similar processes.

Shortcomings: separation is ineffective, and the equipment suffers from clogging and high operating cost.

The new SINOKLE process is based on purely physical separation and achieves efficient treatment of sour water through the coordinated action of several core units.

sinokle

The treatment steps and technical core of the new process mainly cover the following:

  1. CDFU (high-efficiency compact cyclonic flotation) pretreatment: First, the CDFU unit is used to pretreat the sour water. The powerful centrifugal force generated by high-speed rotation brings fine bubbles into full contact with, and adsorption of, the pollutants, so suspended solids and oil are quickly carried to the surface as scum and removed. This step removes most of the suspended solids and oil from the sour water and lightens the load on downstream treatment.

  2. Fine filtration: After CDFU pretreatment the sour water enters the fine filtration stage. Special filter media, with their high porosity and good adsorption performance, further intercept larger solid particles and adsorb part of the dissolved pollutants, pushing effluent quality a step higher.

  3. KHC high-efficiency coalescing separator treatment: As one of the core units of the new process, the KHC high-efficiency coalescing separator relies on a distinctive chemical reaction principle (with no catalyst needed) to remove H₂S, NH₃ and other harmful substances from the sour water with precision. H₂S is converted by chemical reaction into a stable sulphide precipitate and thus separated from the water, while NH₃ is converted into ammonium salts and similar forms, effectively reducing the ammonia nitrogen content.

Compared with conventional processes, the new SINOKLE process offers clear advantages:

  1. High treatment efficiency: the new process uses purely physical separation and needs no chemical dosing to treat sour water efficiently. Its efficiency is far higher than that of conventional processes, quickly removing suspended solids, oil and harmful chemicals.

  2. Significant environmental benefits: the new process produces no oily sludge or other secondary pollutants, avoiding the environmental problems conventional processes can cause. Recovering high-quality light slop oil for direct reuse also puts resources to effective use and supports sustainable economic development.

  3. Small footprint: the equipment is compact and occupies little space, which suits refineries with limited room. The skid-mounted design also makes transport and installation easy, further shortening construction time and cutting cost.

  4. Stable and reliable operation: the process has strong shock resistance and tolerates wide swings in water quality and load. A high degree of automation and simple operation and maintenance keep the equipment running steadily and the effluent consistently on spec.

Performance data:


Item

Specification

Oil content mg/L

Suspended solids mg/L

Process influent

≤100000

≤500

Process effluent

≤200

≤10

Case illustration:
sinokle



Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service