Industrial Wastewater Characteristics by Industry: 17 Effluent Types and Treatment of Toxic Streams
This guide summarizes the water-quality characteristics and treatment difficulties of seventeen industrial effluent types — printing and dyeing, hospital, electroplating, papermaking, tanning, MSG production, pesticide, electrophoresis, laundry, power plant, printing works, brewery, dairy, printed circuit board, starch, slaughterhouse and coking wastewater — followed by treatment approaches for toxic and hazardous industrial wastewater.
1. Printing and Dyeing Wastewater
Printing and dyeing wastewater is large in volume, high in organic pollutants, deeply colored, strongly alkaline and highly variable in quality — a difficult industrial effluent. All four stages of dyeing and finishing discharge wastewater: pretreatment (singeing, desizing, scouring, bleaching, mercerizing) yields desizing, scouring, bleaching and mercerizing liquors; dyeing yields dye liquor; printing yields printing liquor and soap liquor; finishing yields finishing liquor. The plant effluent is a mixture of these streams, or a combined stream excluding the bleaching liquor.
2. Hospital Wastewater
Hospital wastewater is the sewage discharged by hospitals (general hospitals, specialist hospitals and other types) to the natural environment or the municipal sewer. Its quality varies with the hospital's type, scale and location. Each bed discharges roughly 200 to 1000 L of wastewater per day. The main pollutants are pathogens (parasite eggs, pathogenic bacteria, viruses), organic matter, floating and suspended matter and radioactive contaminants; untreated raw sewage carries more than 108 bacteria per millilitre.
3. Electroplating Wastewater
Electroplating wastewater is extremely complex in composition. Beyond cyanide-bearing and acid–alkali streams, heavy-metal wastewater is the class with the greatest potential hazard in the industry. Classified by the metal it carries, it includes chromium-, nickel-, cadmium-, copper-, zinc-, gold- and silver-bearing streams.
4. Papermaking Wastewater
Papermaking is among the industries with the highest energy and material consumption and heavy environmental impact: large effluent volumes, high COD and SS, and severe color. The main treatment problem is that COD consists of an insoluble and a soluble fraction, with the insoluble fraction usually dominant; when the SS is removed, most of the insoluble COD goes with it. Removing SS and COD is therefore the central task of recycled-paper mill wastewater treatment.
5. Tannery Wastewater
Leather production normally includes degreasing, lime-and-hair unhairing, softening, tanning, dyeing and finishing, drying and dressing, with many chemicals added along the way — so the wastewater carries fats, collagen, plant and animal fibers, organic and inorganic solids, sulfides, chromium, salts, surfactants, dyes and other pollutants and toxic substances. Typical combined tannery effluent: CODCr 3000–4000 mg/L, BOD5 1000–2000 mg/L, SS 2000–4000 mg/L, pH 8–11. The wastewater comes mainly from beam-house preparation, tanning and other wet processing. The dirtiest three streams — degreasing, unhairing and chrome-tanning liquors — make up about 50 percent of the volume but carry the great majority of the pollutants: CODCr 80 percent, BOD5 75 percent, SS 70 percent, sulfides 93 percent, sodium chloride 50 percent and chromium compounds 95 percent of the totals. Its characteristics: large fluctuation in quality and quantity; good biodegradability; high SS that rots easily and generates heavy pollution; and toxic compounds such as S2− and chromium.
6. MSG (Monosodium Glutamate) Wastewater
The high-strength organic wastewater of MSG production is chiefly the mother liquor discharged after glutamic acid is extracted from the fermentation broth. It shows "five highs and two lows": high COD, high BOD, high sulfate, high ammonia nitrogen and high cell content, with low temperature and low pH. It is among the hardest industrial wastewaters to treat. (Bathing wastewater, a significant part of municipal sewage, is high in turbidity and phosphorus, low in organics and large in volume.)
7. Pesticide Wastewater
Pesticide wastewater is high in pollutant concentration — COD can reach tens of thousands of milligrams per litre — and highly toxic: besides the pesticides and their intermediates it contains phenol, arsenic, mercury and many substances that microorganisms barely degrade. It is foul-smelling, irritates the respiratory tract and mucous membranes, and is unstable in both quality and quantity.
8. Electrophoresis (E-Coat) Wastewater
The water-borne resins of electrophoretic coating can be diluted and dispersed in water because their polymer chains carry a number of hydrophilic groups — carboxyl (–COOH), hydroxyl (–OH), ether (–O–) and amino (–NH2). By the charge of the resin, anodic (anionic) electrophoretic paints carry carboxyl groups and cathodic (cationic) paints carry amino groups. Throwing power and coulomb efficiency are the two most important electrical characteristics of cathodic electro-coating.
9. Laundry Wastewater
The chief pollutant of laundry wastewater is anionic surfactant (LAS), which binds with other pollutants in the receiving water to form dispersed colloidal particles. Its features: first, complex composition — LAS exists as dispersed and colloidal matter adsorbed on particle surfaces, strongly affecting the physical–chemical and biochemical behavior of the wastewater; second, large swings in quality and irregular discharge — the wastewater is usually alkaline (pH 8–11), LAS ranging from a few tens of milligrams per litre (bathing wastewater) up to several thousand (wool-scouring wastewater), with COD anywhere from a few hundred to over a hundred thousand mg/L; third, toxicity — LAS is chronically toxic to animals and humans, retards oxygen transfer in the receiving water and, in severe cases, deoxygenates and putrefies it, blocking self-purification; high phosphate can also trigger duckweed blooms.
10. Power Plant Wastewater
Power plant wastewater includes washing and ash-transport water, domestic sewage, circulating-water blowdown and resin-regeneration waste. It carries oils and suspended solids, scale inhibitors and biocides, hardness, ash, high salt loads and some organic matter, high sulfite, sulfate and fluoride, heavy metals, and waste heat.
11. Printing Works Wastewater
Printing wastewater carries large acrylic macromolecular aggregates; discharged untreated into the municipal network it severely disturbs treatment processes and destroys the biological system. The volume is relatively small but CODCr is very high — up to 20,000 mg/L — with some SS, bacteria and dissolved matter, and high turbidity and color.
12. Brewery Wastewater
Brewery wastewater comes from the malting house (steeping water), the brewhouse (mashing and filtration wash water), the fermentation hall (fermenter and filter washing), the packaging hall (bottle washing, pasteurization water and beer lost from breakage) and cooling water. It is rich in sugars, alcohols and other organics — high in concentration, non-toxic but quick to putrefy, consuming large amounts of dissolved oxygen when discharged to a water body. Quality and quantity vary with the season, peaking together. Typical values in domestic breweries: CODCr 1000–2500 mg/L, BOD5 600–1500 mg/L; biodegradability is high, with appreciable Kjeldahl nitrogen and phosphorus.
13. Dairy Wastewater
Dairy wastewater is discharged from the production of condensed milk, cheese, butter, dairy drinks, ice cream and dairy snacks, chiefly as wash water from vessels and equipment, carrying product ingredients. Milk-processing plants (0.2 percent raw-milk carryover) run low pollution, BOD 20–300 mg/L; cheese and butter plants are far heavier, with COD up to 3000 mg/L, BOD up to 2400 mg/L, TN up to 90 mg/L, TP up to 16 mg/L, fats up to 200 mg/L and SS up to 600 mg/L. Cream and condensed milk lost with the wastewater should be recovered as by-products and losses minimized in production. Cleaning and disinfection water from vessels, equipment and pipework forms the high-strength stream — COD above 20,000 mg/L at worst, generally above 5000 mg/L — at about 1.0 m³ per tonne of raw milk processed; floor washing and other water (office, domestic) form the low-strength stream, generally below 1000 mg/L COD, at 3–4 m³ per tonne. Liquid-milk and milk-powder plants discharge COD of about 1500–3000 mg/L; yoghurt, butter, ice-cream and cheese plants 4000–7000 mg/L. The chief pollutants are milk proteins (casein, whey protein and the like), lactose, milk fat, the minerals of raw milk, and the acids and alkalis used for cleaning; pH is generally 6.5–7.0.
14. Printed Circuit Board (PCB) Wastewater
PCB wastewater falls into several classes: general rinse water, ink wastewater, EDTA-complexed copper wastewater, copper–ammonia complex wastewater, organic wastewater, fluoride-bearing wastewater, high-copper liquor, concentrated acid and concentrated alkali liquors and other spent bath solutions. It carries heavy metals — copper, nickel, lead, tin — high-molecular organics and complexing agents; heavy metals, COD, SS and pH all exceed limits; the streams are numerous and their pollutants complex.
15. Starch Wastewater
Starch wastewater comes mainly from the washing, filter-pressing and concentration steps of corn-starch processing. It carries large amounts of soluble organics — proteins, sugars, carbohydrates, fats, amino acids — plus nitrogen- and phosphorus-bearing inorganic compounds, volatile acids and ash. It is a readily biodegradable high-strength organic wastewater: COD generally 2500–6000 mg/L, SS 800–1200 mg/L.
16. Slaughterhouse Wastewater
Slaughterhouse wastewater carries blood, fats, hair, viscera, undigested feed and feces; it is blood-red and foul-smelling and contains pathogenic organisms dangerous to human health such as E. coli and fecal streptococci. Its concentration swings widely and its organic content is high; discharged directly, it severely pollutes the receiving water.
17. Coking Wastewater
Coking wastewater is the washing water, gas-scrubbing water, condensate separated after steam stripping and tank drainage of coking plants and gasworks. It contains dozens of inorganic and organic compounds: inorganic — chiefly ammonia salts, thiocyanates, sulfides and cyanides; organic — besides phenols, single-ring and polycyclic aromatics and nitrogen-, sulfur- and oxygen-bearing heterocycles. Heavily polluted, high in concentration, color and toxicity and very stable in character, it is a typical refractory organic wastewater and a conspicuous environmental problem in industrial discharge.
Treatment of Toxic and Hazardous Industrial Wastewater
1. Phenol-bearing wastewater. At 0.1–0.2 mg/L phenol taints fish flesh so it cannot be eaten; at 1 mg/L it affects fish spawning; at 5–10 mg/L fish die in numbers. Phenol in drinking water endangers human health — even at 0.002 mg/L, chlorine disinfection produces foul-smelling chlorophenols. Wastewater above 1000 mg/L phenol is classed as high-strength and the phenol must be recovered before treatment; below 1000 mg/L it is low-strength and is usually recycled, with the phenol concentrated and recovered first. Recovery methods include solvent extraction, steam stripping, adsorption and closed-circuit recycle. Wastewater below 300 mg/L can be treated by biological oxidation, chemical oxidation or physicochemical oxidation before discharge or reuse.
2. Mercury-bearing wastewater. Alkaline mercury wastewater is normally treated by chemical coagulation or sulfide precipitation; acidic wastewater by metallic reduction. Low-concentration streams can be treated by activated-carbon adsorption, chemical coagulation or the activated sludge process. Organic mercury is harder: it is usually oxidized to inorganic mercury first, then treated.
3. Oily wastewater. Oil exists in water in three states: floating oil, droplets above 100 μm, easily separated; dispersed oil, 10–100 μm, suspended in the water; and emulsified oil, below 10 μm, hard to separate. Oil concentrations vary widely between industries: refinery wastewater carries about 150–1000 mg/L of oil, coking wastewater 500–800 mg/L of tar, and gasworks wastewater up to 2000–3000 mg/L. Treatment starts with an oil separator to recover floating or heavy oil, at 60–80 percent efficiency, leaving about 100–200 mg/L in the water. Emulsified and dispersed oil are harder, so emulsification should be prevented or eased — minimize it in production, and minimize pump lifts during treatment, which worsen emulsification. Flotation and demulsification are the usual methods.
4. Heavy-metal wastewater. Heavy metals cannot be destroyed — only relocated, with their physical and chemical forms changed. Chemical precipitation converts dissolved ions into insoluble compounds that settle, moving the metal from water to sludge; ion exchange moves it onto the resin and, after regeneration, into the regenerant. The governing principles are, first and most fundamental, to reform production so that highly toxic metals are avoided or minimized; second, to use sound process flows and scientific management to cut metal consumption, losses with the wastewater and the volume discharged. Heavy-metal wastewater should be treated at its point of origin, not mixed with other streams, and never discharged untreated to the municipal sewer. Two treatment classes exist: converting dissolved metals to insoluble compounds or elements removed by precipitation or flotation — neutralization precipitation, sulfide precipitation, flotation separation, electrolytic precipitation (or flotation), membrane electrolysis; or concentrating and separating the metal without changing its chemical form — reverse osmosis, electrodialysis, evaporation and ion exchange. Methods are used singly or in combination according to water quality and flow.
5. Cyanide-bearing wastewater. Measures: (1) reform the process to reduce or eliminate the discharge, e.g. cyanide-free electroplating; (2) recover from high-strength streams and purify low-strength ones before discharge. Recovery methods include acidification–aeration with alkali absorption and steam stripping. Treatment methods include alkaline chlorination (the most widely applied), electrolytic oxidation, pressurized hydrolysis, biochemical treatment, biological iron, ferrous sulfate and air stripping; ferrous sulfate is incomplete and unstable, and air stripping pollutes the atmosphere while failing to meet discharge standards, so it is rarely used.
6. Pesticide wastewater. Treatment methods include activated-carbon adsorption, wet oxidation, solvent extraction, distillation and the activated sludge process. The fundamental route, however, is the pesticide industry's own direction: high-efficiency, low-toxicity, low-residue products. Some countries have banned organochlorine and organomercury pesticides such as BHC (hexachlorocyclohexane) and are actively developing microbial pesticides — a fundamental way to prevent pesticide wastewater from polluting the environment.
7. Food-industry wastewater. Beyond appropriate pretreatment suited to the water quality, biological treatment is generally the choice. Where effluent requirements are strict or the organic load very high, two-stage aeration basins or two-stage biological filters, multi-stage rotating biological contactors, or two biological units in combination may be used; anaerobic–aerobic series operation is also an option.
8. Papermaking wastewater. Treatment should focus on raising the water-recycle rate and cutting water intake and discharge, while exploring reliable, economical methods that recover useful resources from the wastewater. Flotation recovers fibrous solids from white water at up to 95 percent recovery, with the clarified water reusable; combustion recovers sodium hydroxide, sodium sulfide, sodium sulfate and other sodium salts from black liquor; neutralization adjusts pH; coagulation–settling or flotation removes suspended solids; chemical precipitation decolorizes; biological treatment removes BOD, effective for kraft-paper wastewater; wet oxidation has proved successful for sulfite-pulp liquor. Reverse osmosis, ultrafiltration and electrodialysis are also applied at home and abroad.
9. Printing and dyeing wastewater. The industry uses 100–200 t of water per tonne of textile processed, with 80–90 percent discharged as wastewater. Common measures are recovery and harmless treatment. Recovery: (1) segregate streams by quality — bleaching/scouring liquor and dyeing/printing liquor can be run counter-current, one water serving several uses; (2) recover alkali, usually by evaporation — triple-effect for large volumes, film evaporation for small; (3) recover dyes — vat dyes, for instance, can be acidified into colloidal leuco-acid particles suspended in the liquor and recovered by settling and filtration. Harmless treatment: (1) physical — settling to remove suspended matter and adsorption to remove dissolved pollutants and color; (2) chemical — neutralization to adjust pH and cut color, coagulation to remove dispersed dyes and colloids, oxidation to convert reducing substances so that sulfur and vat dyes precipitate; (3) biological — activated sludge, rotating biological contactors, biological drums and biological contact oxidation. Meeting discharge or reuse standards usually requires several methods combined.
10. Dye-manufacturing wastewater. Choose methods by the wastewater's character and the discharge requirement. Remove solids and inorganic matter by coagulation and filtration; remove organics and toxic substances mainly by chemical oxidation, biological treatment and reverse osmosis; decolorize by a train of coagulation and adsorption; remove heavy metals by ion exchange.
11. Chemical-industry wastewater. The main measures of pollution prevention are, first, to reform processes and equipment to reduce pollutants, prevent discharge and enable comprehensive utilization and recovery; the degree of treatment for unavoidable discharge is chosen by water quality and requirement. Primary treatment separates suspended solids, colloids, floating and heavy oil — flow and quality equalization, natural settling, flotation and oil separation. Secondary treatment removes biodegradable dissolved organics and part of the colloids, cutting BOD and part of the COD, normally biologically. Treated wastewater still carries appreciable COD, sometimes strong color, odor and taste; where environmental-health standards are strict, tertiary treatment follows: removal of refractory organics and dissolved inorganics, commonly activated-carbon adsorption and ozone oxidation, with ion exchange and membrane separation also available. Each stream is matched to its own quality, flow and required effluent standard.
12. Acid and alkali wastewater. Strongly corrosive, it must be treated before discharge. Principles: (1) high-strength acid and alkali wastewater should first be recovered and reused — dispatched within the plant or region by water quality, flow and process needs; where reuse is difficult, or the concentration low and the flow large, recover the acid or alkali by concentration; (2) low-strength streams, such as acid-pickling rinse water and alkali-scrub rinse water, should be neutralized — with waste against waste first, neutralizing acid wastewater with alkali waste (or residue) and vice versa, and neutralizing agents where those conditions are absent.