Process Optimisation of SINOKLE Carbon-Supported Heterogeneous Ozone Catalysts

2026-11-16 09:46:02
立即下载

As industrialisation accelerates, industrial wastewater has become complex in composition, containing a variety of organic pollutants and heavy metals that conventional physical and biological methods can hardly purify completely, making it one of the key challenges of environmental governance. Ozone, a strong oxidant, is widely used in water treatment for disinfection, decolourisation and removal of organics. However, the low solubility of ozone in water and its slow reaction rate limit its effectiveness. Introducing a heterogeneous catalyst can markedly raise the ozone utilisation rate and reaction efficiency and generate highly active radicals such as hydroxyl radicals, thereby accelerating the oxidative decomposition of organic pollutants.

To meet this need, SINOKLE has developed a series of carbon-supported heterogeneous ozone catalysts. By varying the supported metal species, the loading method, the calcination temperature and the calcination time, the catalyst performance can be precisely tuned. Catalysts loaded with copper, iron, manganese and other metals, for example, show different catalytic behaviour, while calcination temperature and time strongly affect the pore structure, specific surface area and metal dispersion, and hence the activity and stability of the catalyst. This effectively improves the efficiency of ozone in removing organic pollutants from water and enables efficient treatment of different industrial wastewaters.


Effect of the supported metal species

The supported metal species strongly influences the activity, selectivity and stability of the catalyst. The metals supported on SINOKLE heterogeneous ozone catalysts include transition metals (such as Mn, Co, Ni, Cu and Fe) and precious metals (such as Pt, Pd and Ru). Different metals and metal oxides have different catalytic characteristics: the hydrated oxides of iron, zinc, copper and their composites all show some catalytic ozonation ability, and hydrated ferric oxide is particularly effective. Choosing the right metal species requires a balanced consideration of catalytic efficiency, stability and cost.

Transition metals. Mn: MnOx catalysts have been widely studied for their good ozone decomposition performance, and the Mn loading, valence state and crystal phase strongly affect the catalytic behaviour; Co: Co-based catalysts perform well in ozone decomposition and organic oxidation, their activity depending on the oxidation state and dispersion of Co; Cu: CuOx catalysts show high ozone decomposition activity at low temperature but poor stability and are easily affected by the reaction conditions.

Precious metals. Pt: Pt-based catalysts have extremely high catalytic activity but a high cost, and are used where high activity and selectivity are required; Pd: Pd catalysts perform well in ozone decomposition and organic oxidation, especially for refractory organics.


Metal loading method

Metal loading methods include impregnation, co-precipitation and the sol-gel method. The method affects the distribution and amount of the active component on the support and hence the overall performance of the catalyst. The methods most often used are impregnation and precipitation-adsorption.

  • Impregnation: the support is soaked in a salt solution containing the active component and then dried and calcined to load the metal.

  • Impregnation is simple and easy to apply, but the metal dispersion and loading are relatively hard to control.

  • Co-precipitation: a metal salt solution is mixed with a precipitant and the pH is adjusted so that the metal ions co-precipitate. Co-precipitation gives good control of metal dispersion and loading.

  • Sol-gel method: a sol is formed by hydrolysis and condensation of metal alkoxides and then converted into a gel. This method yields catalysts with high dispersion, but at a relatively high cost.


Calcination temperature

SINOKLE precisely controls the calcination temperature to give the catalyst a suitable pore structure and a high specific surface area, thereby improving ozone adsorption and catalytic efficiency. Calcination temperature is another key factor in catalyst performance. A suitable temperature promotes uniform dispersion and crystallisation of the active component on the support and raises the activity, with a marked effect on the crystal phase, the metal dispersion and the specific surface area of the support. Too high a temperature, however, may damage the surface structure and reduce the specific surface area, lowering the activity. Low-temperature calcination (<400 °C) helps to preserve a high specific surface area and high metal dispersion but may leave the metal oxides incompletely converted. High-temperature calcination (>500 °C) favours a stable crystal phase but may cause metal particles to agglomerate, reducing dispersion and surface area. By precisely controlling the calcination temperature (700-900 °C), SINOKLE ensures a suitable pore structure and a high specific surface area, thus improving ozone adsorption and catalytic efficiency.


Calcination time

Calcination time affects catalyst performance in much the same way as calcination temperature. A short calcination helps to preserve high metal dispersion but may not fully remove organic impurities or form a stable crystal phase. Conversely, a long calcination favours a stable crystal phase, but excessive time may damage the surface structure and reduce activity. Optimising the calcination time is therefore an important step in improving catalyst performance. After hundreds of experimental runs, SINOKLE researchers finally set the calcination time of the ozone catalyst at 4-6 h.

sinokle

SINOKLE carbon-supported ozone catalyst

After countless rounds of experimental optimisation by SINOKLE researchers, the resulting heterogeneous catalyst offers the following advantages:

  • High strength: the catalyst has excellent mechanical strength, keeps its structure stable under all kinds of reaction conditions, and resists breakage and deformation, which extends its service life.

  • High catalytic performance: fine tuning of the supported metal species, the loading method, the calcination temperature and the calcination time gives the catalyst outstanding catalytic performance, effectively raising the reaction rate and selectivity while reducing energy consumption and by-product formation.

  • Wide application range: thanks to its high strength and excellent catalytic performance, the catalyst suits many reaction systems, including oxidation, reduction, hydrogenation and dehydrogenation, providing strong support for chemical synthesis in different fields.

  • Environmentally friendly: in both manufacture and use, SINOKLE attends to environmental protection and sustainability, ensuring that the catalyst is non-toxic, harmless and easy to recover and dispose of, in line with the trend of modern green chemistry.


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service