Landfill Leachate Treatment Technology
1. Definition and sources of leachate
Landfill leachate: the wastewater formed from water produced by the decomposition of organic matter in the waste, free water in the waste, precipitation and infiltrating groundwater.
Main sources: infiltration of precipitation, inflow of surface water, infiltration of groundwater, moisture contained in the waste itself, and water produced during waste degradation.
2. Types of landfill leachate
Water-soluble organics: expressed as chemical oxygen demand (COD) or total organic carbon (TOC), mainly from the decay of plant and animal residues, including volatile fatty acids, fulvic acids and humic acids.
Organics of heterogeneous biomass (XOCs): mainly from household and industrial chemicals.
Inorganic macro-components: including calcium, sodium, potassium and iron salts, sulphates and carbonates.
Heavy metals: including copper, chromium, cadmium and manganese ions.
3. Characteristics of landfill leachate
Variable water quality: leachate quality varies widely with the nature of the landfill, the amount and age of the waste and the waste itself. Even within one landfill it differs considerably as filling proceeds, and can change from day to day.
High pollutant concentrations: COD in fresh leachate can reach tens of thousands of mg/L.
High salinity: salt content is typically 1.5%-2%, which places higher demands on downstream biological treatment.
Toxic and harmful constituents: because industrial waste is mixed in, leachate from municipal landfills often contains aromatic toxic substances, surfactants and heavy metals, which strongly affect downstream treatment.
Unbalanced nutrient ratio: ammonia nitrogen rises as the landfill ages and the C/N ratio becomes unbalanced; high ammonia nitrogen inhibits the biological system. In mature landfills ammonia nitrogen can exceed 10,000 mg/L.
Landfill leachate is difficult to treat: there are currently many processes, all costly, effluent quality is unstable and membrane concentrate cannot be handled.
4. Landfill leachate discharge standards
New landfills face strict treatment and discharge requirements under Table 1 of the Standard for Pollution Control on the Landfill Site of Municipal Solid Waste.
Table 1 Effluent concentration limits for water pollutants at existing municipal solid waste landfills
Table 1 shows that treated leachate must meet demanding limits for COD, BOD, ammonia nitrogen and various metals, making treatment difficult.
5. Current status of leachate treatment
In China, leachate treatment is now dominated by biological technology, whereas abroad the research and application focus mainly on physico-chemical treatment. For high-strength wastewater of complex composition, biological treatment alone cannot meet discharge standards; for mature leachate in particular it is largely ineffective.
In fact, leachate treatment at most sanitary landfills in China does not meet the national standards and has caused serious groundwater pollution. Among physico-chemical technologies, activated carbon adsorption removes only substances with a molecular weight below 1000 and is very costly; membrane processes require very high capital and operating expenditure. Apart from a few small-scale plants in China with stringent effluent requirements, they are not suitable for leachate treatment at most Chinese landfills.
6. Conventional leachate treatment processes
Leachate treatment comprises biological, chemical and physical treatment.
Because leachate is hard to treat, a typical combined system is shown below; compliance is difficult to achieve, and anaerobic + two-stage A/O + MBR + NF is currently the mainstream leachate process, with an RO membrane system added when performance is unstable.

There is no single best leachate process, only the most suitable one. Compliant effluent, low investment, easy maintenance, long service life and public acceptance are the principles for selecting a leachate process.
7. SINOKLE's new process and its advantages
To address groundwater pollution, SINOKLE has combined catalytic ozonation, cyclone technology and dissolved-gas flotation to develop a new leachate treatment solution. The new process offers a fresh approach to solving the leachate treatment problems of sanitary landfills.

Advantages of the new process:
Completely avoids conventional nanofiltration, reverse osmosis and concentrate treatment;
Greatly reduces investment;
Greatly improves long-term equipment stability and reliability;
Greatly reduces operating and maintenance costs;
Broad application prospects.
8. Application case of the new process


Project photo
A landfill in Hubei uses SINOKLE's CDOF integrated unit with an average daily capacity of 50 m³/d, achieving COD ≤300 mg/L and colour ≤30 with no odour. Biologically treated effluent: COD ≤20 mg/L, ammonia nitrogen ≤1 mg/L, total phosphorus ≤0.2 mg/L (Class III surface water standard) - clear, pollution-free and fully compliant for discharge.