A Green and Efficient Approach to High-Oil, Highly Emulsified Sour Water
I. Definition and Sources of High-Oil, Highly Emulsified Sour Water
High-oil, highly emulsified sour water is a special wastewater generated during petroleum processing and refining. It carries a high concentration of oil, present in a highly emulsified form, and also contains acidic substances.
Its sources cover the various stages of petroleum refining, such as cooling water and washing water from refinery units.
II. Characteristics and Treatment Difficulties
This wastewater has the following characteristics:
High oil content: the oil concentration is far above that of ordinary wastewater, which increases treatment difficulty.
Severe emulsification: the oil exists in a highly emulsified form, making oil-water separation difficult.
Large fluctuations: water quality and flow often vary, placing higher demands on process stability.
Acidic substances: the acids present may corrode treatment equipment and piping.
Treatment difficulties:
How to demulsify effectively and achieve efficient oil-water separation.
How to cope with fluctuations in water quality and quantity while keeping the process stable.
How to reduce secondary pollution from the treatment itself and achieve green processing.
III. Conventional Processes and Their Shortcomings
Conventional treatment of high-oil, highly emulsified sour water relies mainly on chemical demulsification, gravity settling and flotation. These processes have the following shortcomings:
Chemical demulsification requires chemical agents, which raises cost and may cause secondary pollution.
Gravity settling and flotation are relatively inefficient and struggle to meet the demands of this kind of wastewater.
Conventional processes need a large footprint, involve cumbersome civil works and carry high operating and maintenance costs.
IV. SINOKLE's New Process and Its Advantages
SINOKLE has developed a completely new process to tackle the difficulties of high-oil, highly emulsified sour water. It mainly comprises the following steps:
High-efficiency coalescing pressure oil removal: a high-efficiency coalescing pressure separator quickly removes floating oil, free oil and part of the emulsified oil.
HCC coalescing oil removal: the HCC coalescing separator breaks the emulsion of droplets above 0.5 μm, converting emulsified oil into small free-oil droplets.
CDFU high-efficiency air flotation and rapid oil-water separation: the CDFU equipment achieves efficient oil-water separation, and the final product water is sent to the downstream treatment system.
Process flow diagram
The new process offers the following clear advantages:
Purely physical demulsification with no chemical dosing and no oily sludge, achieving green and efficient treatment.
Highly integrated, skid-mounted equipment with a small footprint and far less civil work, lowering capital cost.
Strong shock resistance and stable operation, tolerating fluctuations from 10% to 150% of design load.
Core equipment has no wearing internals, giving long operating cycles and low maintenance cost, which reduces total operating expense.
The equipment runs enclosed, safe and environmentally sound, avoiding the secondary pollution that treatment can otherwise cause.
The process can run fully automatically with operating data monitored remotely, improving management efficiency.
V. Examples of Treatment Results
Product water Raw water
Raw water Product water