Advanced Oxidation Treatment of Nanofiltration Concentrate
1. High Salinity
Salt concentration: typically 2-5 times that of the raw water, with large amounts of multivalent ions (e.g., Ca²⁺, Mg²⁺, SO₄²⁻).
Conductivity: up to 5,000-20,000 μS/cm (depending on raw water quality).
2. High Organic Load
COD range: 200-2000 mg/L, containing macromolecular organics (humic acids, polysaccharides), colloids and some small-molecule hydrophobic organics.
Emerging contaminants: may be enriched with pharmaceutical residues, endocrine disruptors (EDCs) and disinfection by-products (DBPs).
3. Fluctuating pH
Range: 5.5-9.5; affected by the raw water pH and membrane rejection characteristics, it may be acidic (industrial wastewater) or weakly alkaline (municipal sewage).
4. Suspended Solids and Microorganisms
Contains retained colloidal particles, bacteria and viruses; the SS (suspended solids) concentration is typically 50-300 mg/L.
5. Main Treatment Challenges
Multivalent ions (Ca²⁺, SO₄²⁻) readily form CaCO₃ and CaSO₄ scale that clogs downstream treatment equipment.
Macromolecular organics (molecular weight 200-1000 Da) are difficult to biodegrade and require chemical oxidation pretreatment.
Colloids and microorganisms easily foul downstream membrane treatment (e.g., reverse osmosis) and reduce flux. Combined processes (e.g., evaporation-crystallization, advanced oxidation) are required, with high energy and chemical costs. Direct discharge may exceed limits (e.g., COD > 100 mg/L, TDS > 2000 mg/L), so near-zero liquid discharge (ZLD) must be achieved.

Catalytic ozone oxidation is a highly efficient advanced oxidation process (AOP) in which a catalyst activates ozone (O₃) to generate strongly oxidizing free radicals (such as ·OH and O₂⁻·), significantly improving the removal of refractory organics. Building on existing catalytic oxidation technology, SINOKLE upgraded and improved the technology and independently developed the CDOF process, which can effectively treat polluted nanofiltration concentrate wastewater.
CDOF - Cyclonic Dissolved Ozone Flotation unit - is the company's patented technology. It integrates multi-stage catalytic ozone oxidation, hydrodynamic cavitation and cyclonic flotation, and is a domestically pioneering integrated oxidation-flotation device with internationally leading performance, capable of rapidly and efficiently removing petroleum, suspended solids, colloids, COD, bacteria and other pollutants from wastewater. The unit consists of an oxygen supply system, an ozone generation system, an efficient ozone dosing system, a multi-stage catalytic reaction system and a cyclonic dissolved-gas flotation system.
CDOFTechnical Principle
The catalytic ozone oxidation process has a short flow path, simple equipment, small and compact treatment units, a small footprint, few electrical devices, low power consumption and low operating costs; it is easy to operate and can be automatically controlled, simplifying on-site operation requirements. When flow or water quality changes, flow and quality can be adjusted accordingly, showing strong adaptability and shock-load resistance. It can also be combined with other technologies (such as biological treatment) to leverage the advantages of each and further improve treatment results.

CDOFLandfill Leachate Treatment Application Case
CDOFApplication Case (Treating Nanofiltration Concentrate)
A landfill leachate treatment plant: treatment capacity 300 m³/d; ozone output 8 kg/h; MBR effluent COD ≤ 1300 mg/L.CDOFEffluent: COD ≤ 400 mg/L, chromaticity ≤ 30, no odor. Biological treatment effluent: COD ≤ 20 mg/L, ammonia nitrogen ≤ 1 mg/L, total phosphorus ≤ 0.2 mg/L (Surface Water Class III). The effluent is colorless and odorless, with high removal rates and strong stability; the equipment resists scaling, features automatic cleaning and easy operation, runs fully enclosed under pressure with zero leakage, keeps the site environment friendly with no hidden hazards — safe and environmentally sound.