Technological Innovation in Refining Sour Wastewater Treatment: The CDFU+KHC Process

2026-11-17 10:50:12
立即下载
SINOKLE291


As China's consumption of petroleum products keeps growing, the environmental pollution generated in petroleum refining has become increasingly prominent. Among these problems, the sour wastewater generated in refining, with its high sulfur and high ammonia-nitrogen content, is an urgent environmental challenge. Conventional sour water stripping units can effectively remove ammonia and hydrogen sulfide from the wastewater, but suffer from fouling, high energy consumption and easily clogged membrane filtration. Against this backdrop, the CDFU (cyclonic dissolved gas flotation) + KHC (high-efficiency coalescing separator) wastewater treatment process emerged, bringing a technological innovation to the treatment of refining sour wastewater.

I. Formation and Hazards of Sour Wastewater

In petroleum refining, sulfides and nitrogen compounds in crude oil undergo high-temperature cracking, catalytic refining and other reactions to form toxic and harmful gases such as H2S and NH3. When absorbed by water, they form sulfur- and ammonia-bearing wastewater — sour water. If discharged without effective treatment, sour water causes serious environmental pollution: it lowers water pH and harms aquatic life, and acidifies soil, damaging ecosystems.

II. CDFU + KHC Wastewater Treatment Process Overview

CDFU (Cyclonic Dissolved Gas Flotation Unit), or cyclonic dissolved gas flotation, is a high-efficiency compact cyclonic flotation device. It cleverly combines ultrafine bubble generation, cyclonic centrifugal separation and dissolved-gas flotation technologies, generating micro-nano bubbles through gas dissolution and swirling flow to greatly enhance flotation performance. The unit quickly and efficiently removes suspended solids, waste oil, emulsified oil and other impurities, and is suitable for treating all kinds of difficult oily (and suspended-solids-laden) wastewater.

The KHC high-efficiency coalescing oil separator is a new-type oil separator optimized and improved on the basis of advanced domestic and international technologies. It comprehensively applies Stokes' law, shallow-pool theory and coarse-graining principles: inlet cyclonic centrifugal action rapidly separates dispersed oil while accelerating droplet coalescence. A specially designed sand-flushing system inside can be flushed promptly according to sediment conditions, preventing blockage of the vessel interior and the packing and keeping treatment performance stable.

III. Application Cases and Results

In a treatment trial on vacuum tower overhead sour water at a chemical enterprise, with the CDFU + KHC process, sour water with an inlet oil content of 5% was reduced to below 50 mg/L oil in the effluent, with water content in the recovered oil below 0.1% — remarkable treatment results.

sinokle

Vacuum Tower Overhead Sour Water Treatment Trial

In addition, at the coking sour water treatment unit of a Sinopec refinery, the process again showed outstanding performance. The inlet wastewater contained as much as 15% oil (150,000 ppm); after treatment, effluent oil averaged below 50 ppm, far below the national discharge standard.

sinokle

Coking Sour Water Treatment Unit

IV. Conclusion

CDFUThe CDFU + KHC wastewater treatment process, with its high efficiency, stability and environmental friendliness, provides a brand-new solution for treating refining sour wastewater. It not only effectively solves the fouling, high energy consumption and membrane clogging problems of conventional processes, but also achieves high-quality wastewater reuse, creating significant economic and social benefits. As the technology continues to spread and be applied, we believe the


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service