Technical Breakdown: How CDFU + Fine Filtration + KHC Handle Highly Emulsified Coking Sour Water
Coking sour water is the high-concentration oily wastewater generated by delayed coking units — severely emulsified and extremely high in oil content, averaging over 13.3% oil and up to 16%, and carrying large amounts of coke powder, ammonia nitrogen, sulfides and volatile phenols. SINOKLE's solution is the CDFU + fine filtration + KHC high-efficiency coalescing separator, a three-stage combination. This article breaks it down at three levels: unit roles, demulsification mechanism and equipment configuration.
I. Unit Roles: Why Three Stages Are Necessary
The problem with coking sour water is compound: extremely high oil, extremely deep emulsification, extremely fine solids. Any single unit covers only one of these dimensions. The essence of the three-stage design is progressive escalation by difficulty: the first stage handles volume and solids, the second handles fineness and stability, the third handles the hardest and deepest problems.

Remove the first stage and the high oil concentration and coke powder will overwhelm downstream equipment; remove the second and fine particles will occupy the coalescing cartridge surface and shorten its life; remove the third and the finest emulsified oil cannot be physically broken, so oil carryover in the effluent remains.
II. CDFU: An Oil-and-Solids Removal Unit Integrating Multiple Technologies
CDFU CDFU is a high-efficiency compact cyclonic dissolved-gas flotation unit whose technical hallmark is integrating cyclonic centrifugal separation, ultrafine bubble generation, dissolved-gas flotation, and coalescing and demulsification technologies in a single enclosed pressurized device, achieving fast, efficient separation of waste oil, emulsified oil and suspended solids.

The value of this integration lies in complementary mechanisms. Cyclonic centrifugal force uses density difference to amplify the separation driving force, solving the speed problem; ultrafine bubbles provide a vast array of tiny attachment interfaces, solving the problem of fine oil droplets and coke powder that will not float; dissolved-gas flotation lifts pollutants and skims them off, solving the outlet problem; coalescence promotes collision and merging of micro oil droplets, while demulsification acts directly on the interfacial film. For coking sour water with its extremely high oil and abundant coke powder, multi-mechanism synergy is more reliable than any single mechanism.
III. Fine Filtration: The Underrated Stabilizer
Fine filtration sits after the CDFU and before the coalescing separator; its task is deep removal of suspended solids. After flotation, the oil content of the water has dropped significantly, but fine coke particles and flocs remain. Small in size and large in specific surface area, they will attach to the cartridge surface if they enter the coalescing separator, occupying coalescence space that should be reserved for oil droplets.
IV.KHC: Purely Physical Demulsification at 0.1 Micron Precision
The KHC high-efficiency coalescing separator is the technical high point of the whole process. Its coalescing cartridge is made of special material imported from the United States, with the ability to capture and coalesce extremely fine emulsified oil droplets, achieving demulsification precision down to 0.1 microns. The working process can be understood in three steps: capture, coalesce, separate.
Capture relies on the special material's affinity for the oil phase, so micro oil droplets are adsorbed and retained as they flow through the cartridge; coalescence relies on oil droplets constantly colliding, merging and growing from small droplets into large ones; separation relies on the density differences among oil, gas and water, letting the enlarged oil phase naturally rise or stratify and drain. No chemicals are dosed anywhere in the process — the fundamental difference from chemical demulsification.
The chain of benefits from going chemical-free is clear: no chemical flocs, so no additional scum; no scum, so one less source of hazardous oily sludge; no acid or alkaline cleaning, so no cleaning wastewater to handle. Conventional flotation-plus-membrane-filtration processes need chemicals or cleaning to keep running, and secondary pollution and effluent fluctuation follow. Physical demulsification bypasses that cycle by principle.
V. Equipment Configuration: Skid-Mounted, Enclosed, Automated
The whole process uses a skid-mounted design with fully enclosed automatic control. The full enclosure targets the high sulfide content of coking sour water: no acidic gas escapes, the site environment stays friendly, and operation is safe and environmentally reliable. The skid design compresses footprint, schedule and retrofit difficulty, allowing rapid deployment inside existing plants.

VI. Conclusion
The technical logic of the three-stage combination can be summed up in one sentence: resolve complexity by staging, replace chemicals with physics.CDFU handles volume and solids, fine filtration handles fineness and stability, and KHC handles the hardest and deepest problems. For highly difficult wastewater such as highly emulsified coking sour water, this division of labor is more practicable in engineering and better able to hold the effluent bottom line over the long term.