One-Step Demulsification Process for Emulsified Wastewater
What is emulsified wastewater?
Emulsified wastewater is a relatively difficult industrial wastewater to treat. It mainly comes from machining, petrochemical, pharmaceutical and other industries, and the water contains large amounts of grease, surfactants, organic solvents and other harmful substances. If discharged directly without treatment, it will cause serious harm to the environment and human health.

What are the main characteristics of emulsified wastewater?
High oil concentration, and the oil exists in emulsified form that ordinary processes find difficult to separate.
High pollutant concentration: although the flow rate of emulsified wastewater is small, its concentration is very high — the COD concentration often exceeds 50,000 mg/L and can even reach 100,000 mg/L, so high that simple wastewater treatment processes cannot be applied directly.
Complex composition: the emulsion contains large amounts of oil, LAS, additives and other substances; the composition is complex and the properties stable, so demulsification and pretreatment are needed first before the organic matter in the wastewater can be further treated.
What are the conventional processes for emulsified wastewater treatment?
The main conventional processes currently used for emulsified wastewater treatment include physicochemical methods, biochemical methods, adsorption and membrane filtration.
(1) Physicochemical + biochemical. This method is suitable for sites with low emulsion concentration and large flow. Advantages: low operating costs and good effluent. Disadvantages: high initial investment, relatively complex operation and management, and high demands on operators.
(2) Physicochemical + adsorption. This method is suitable for most emulsified wastewater. Advantages: wide applicability and simple operation. Disadvantage: the activated carbon filter media must be replaced after adsorption saturation, increasing operating costs.
(3) Physicochemical + membrane filtration. This is an emerging process in China, suitable for most emulsified wastewater. Advantages: good effluent quality and easy management. Disadvantages: large one-time investment, difficult handling of concentrate and backwash water, and easily clogged pores.
What new processes exist for emulsified wastewater treatment?
To solve the pain points of emulsified wastewater treatment, SINOKLE Technology adopts its patented cyclonic dissolved-air flotation CDFU unit, which efficiently achieves oil-water separation, effectively removes emulsified oil and realizes stable compliant discharge. The cyclonic dissolved-air flotation CDFU unit integrates cyclonic centrifugal separation technology, ultrafine bubble generation technology and dissolved-air flotation technology; through the organic combination of these multiple technologies, it rapidly and efficiently separates waste oil, emulsified oil, suspended solids and other pollutants from the wastewater.

Emulsified acidic wastewater treatment unit
Features of the new emulsified wastewater treatment process:
The patented technology achieves purely physical demulsification and separation of emulsified oil — stable, reliable and with high oil removal efficiency;
The waste oil is recoverable, with no secondary pollution and no oily sludge (hazardous waste) generated, solving environmental problems while creating economic benefits;
The equipment runs enclosed and pressurized, with no hydrogen sulfide or oil vapor leakage — site-friendly, safe and environmentally sound;
The equipment occupies little space, is fully automated and easy to operate and maintain, has a short construction period, and can be implemented online;
The system is strongly shock-resistant and operates stably, tolerating large fluctuations in water quality.

CDFU-treated emulsified wastewater