A New Breakthrough in Desalting Wastewater Treatment: Coalescence-Cyclonic Technology Solves Refining Environmental Challenges

2026-11-16 11:01:29
立即下载
SINOKLE360

I. Characteristics of desalting wastewater and the need for treatment

Salts such as sodium chloride and magnesium chloride contained in crude oil readily form salt scale on pipe walls during processing, reducing heat transfer efficiency and causing equipment corrosion. The electrostatic desalting process (5% wash water plus demulsifier) can reduce the salt content of crude oil to below 5 mg/L (below 3 mg/L for heavy oil processing), but the resulting desalting wastewater is highly polluting:

  • Complex composition: oil content of 200–10,000 mg/L, with the oil fraction reaching 50% in extreme cases; COD fluctuating between 3,000 and 25,000 mg/L; suspended solids concentration of 800–4,500 mg/L

  • Treatment challenges: continuous 24-hour treatment is required and pollutant concentrations surge during backwashing, which the design indicators of conventional wastewater treatment plants (COD < 1,500 mg/L, oil < 200 mg/L) can hardly cope with

II. Bottlenecks of conventional treatment technologies

  1. Gravity settling: relies on natural separation and easily shocks downstream systems

  2. Hydrocyclone method: poor adaptability to oil content fluctuations and insufficient effluent stability

  3. Coalescence method: unable to effectively treat emulsified oil, with limited equipment efficiency
    Existing technologies generally suffer from weak shock resistance, strong chemical dependency and large footprints, and can hardly cope with the organic pollution challenges brought by new oil-displacing agents.

III. Innovative technology principles and breakthroughs

To address the above challenges, a two-stage treatment system integrating coalescence and cyclonic technologies was developed:

sinokle

  1. High-efficiency coalescing pressure oil remover

    • Adopts a CFD-optimized bidirectional flow field design, improving oil droplet coalescence efficiency by 40%

    • Treatment time shortened to 1–5 minutes, single-stage oil removal rate above 90%, capable of capturing oil droplets down to 0.3 µm

  2. Cyclonic dissolved-air flotation unit

    • The tangential inlet design generates super-strong centrifugal force (acceleration up to 2,000g)

    • Integrates dissolved-air flotation technology to achieve deep separation of emulsified oil

IV. Core advantages of the technology

  1. Treatment performance

    • Effluent oil below 150 mg/L, with shock-load resistance improved 3-fold

    • No chemical dosing throughout the process; scum generation reduced by 80%

  2. Operating economics

    • Footprint only 1/8–1/3 of conventional flotation, with energy consumption down 65%

    • 70% fewer moving parts and 40% lower maintenance costs

  3. Intelligent control

    • Fully enclosed pressurized oil discharge system enables automated operation

    • Handles complex conditions with oil content of 200–50,000 mg/L and pH 4–10

      sinokle

V. Industrial application results

The technology has been successfully applied at Sinopec Cangzhou Refinery, PetroChina Sichuan Petrochemical and other companies:

  • Treatment indicators: Effluent oil content below 150 mg/L, meeting the specification

  • Operating stability: continuous operation extended to 12 months, backwash cycle shortened by 50%

  • Environmental benefits: hazardous sludge reduced by 3,000 tons per year, wastewater reuse rate raised to 30%

    sinokle

VI. Technology development prospects

As environmental standards in the refining industry become stricter, the technology can be extended to:

  1. Shale gas flowback fluid treatment

  2. Oilfield produced water reuse systems

  3. Offshore platform oily wastewater treatment
    Modular design further reduces investment costs, and combined with AI-based intelligent control, treatment efficiency is expected to improve by another 20%.


Breaking through the limitations of conventional processes, this technology achieves green, efficient treatment through physically enhanced separation, providing a brand-new solution for wastewater management in China's refining industry, with significant environmental and economic benefits.


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service