Treatment Process Technology for Coking Acidic Wastewater

2026-11-16 09:47:06
立即下载


1. Understanding coking acidic wastewater

Definition: wastewater generated in coking production by coking, gas purification and other processes, containing high concentrations of organic matter, sulphides, ammonia nitrogen and suspended solids (such as coke powder).

Sources: coal gas washing at the coke oven, gas condensate, crude benzene processing wastewater and tar processing wastewater.

Types: high-concentration organic wastewater, sulphur-bearing wastewater, ammonia-nitrogen wastewater and suspended-solids-bearing wastewater.


2. Characteristics and treatment difficulties of coking acidic wastewater

Characteristics:

  • High coke powder content with a fine particle size distribution, high oil content, small oil droplet size and severe emulsification.

  • Complex composition with large fluctuations in concentration, containing sulphides, ammonia nitrogen and other harmful substances.

  • The wastewater is acidic and has a pungent odour.

Treatment difficulties:

  • Emulsified oil and suspended solids (coke powder) impair stripping performance and the quality of the liquid ammonia.

  • The stripping tower is easily blocked, causing unplanned shutdowns.

  • Sulphides, ammonia nitrogen and other pungent odours escape, affecting the environment and employee health.

  • Non-compliant effluent discharged to the wastewater plant puts environmental pressure on the enterprise.


    3. Conventional processes for coking acidic wastewater and their shortcomings

  • Chemical precipitation: large amounts of chemicals are required and secondary pollution is generated.


  • Flotation: unstable performance, easily affected by fluctuations in wastewater composition.

  • Biological treatment: long treatment cycle, demanding water quality requirements and limited removal of certain harmful substances.


sinokle

Coking acidic wastewater treatment unit

The new SINOKLE solution:

Taking account of the characteristics of acidic wastewater, SINOKLE adopts a patented process built around CDFU (cyclonic dissolved gas flotation) + SiC filter + KHC high-efficiency coalescing deoiler as the core equipment, achieving purely physical demulsification and separation of the acidic water.


Process steps:

  1. Pre-treatment: CDFU (cyclonic dissolved gas flotation) serves as the front-end pre-treatment unit; through the action of ultra-fine nano-bubbles it performs preliminary demulsification of the emulsified oil and achieves rapid oil-water separation.

  2. Deep filtration: after CDFU treatment the wastewater enters the SiC filter for further removal of suspended solids and residual oil droplets.

  3. Efficient coalescing deoiling: the wastewater enters the KHC high-efficiency coalescing deoiler for purely physical demulsification, recovering slop oil of good quality and low water content.


sinokle

Coking acidic wastewater treatment performance


Technical advantages:


  • Stable and effective demulsification: CDFU combined with KHC technology ensures rapid, stable oil-water separation under fluctuating operating conditions.

  • Energy saving and environmental protection: the recovered slop oil is of good quality and can be reprocessed, reducing energy consumption and waste emissions.

  • No secondary pollution: no chemicals are added and no scum or oily sludge is produced, so both the operating cost and the secondary treatment cost are low.

  • High degree of automation: mainly static equipment, with a high degree of automation, little maintenance, long overhaul intervals and good reliability.

  • Small footprint: compact equipment and a small footprint suit enterprises of any size.


Mobile phone/Whatsapp

+86 18926412206

Email

marketing@sinokle.com

Address

Room 2301, Building 1B, Smart Home, Baolong Street, Longgang District, Shenzhen, China

Phone
E-mail
Map
QQ Service